【摘 要】
：
In this work,the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 (NCM811) has been investigated after cycling with various upper cutoff voltages.Noteworthily,electrochemical impedance of NCM811 declined with the increasing cycle number to high voltages
【机 构】
：
Engineering Laboratory for Next Generation Power and Energy Storage Batteries, Graduate School at Sh
论文部分内容阅读
In this work,the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 (NCM811) has been investigated after cycling with various upper cutoff voltages.Noteworthily,electrochemical impedance of NCM811 declined with the increasing cycle number to high voltages.It was found that the decline of charge transfer impedance could be related to the structural and compositional change of cathode electrolyte interphase (CEI) of NCM811 when charging to high voltages,based on the characterization of electrochemical impedance spectroscopy (EIS),X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM).The corresponding mechanism has also been proposed in this study.Specifically,due to the increasing roughness of cathode surface,the bottom of CEI film and cubic phase on cathode surface form a transition region mainly at high voltages,leading to the nonobvious boundary.This newly formed transition region at high voltages could promote the Li ion diffusion from electrolyte to cathode,then reducing charge transfer impedance.Additionally,the decrease of LiF on the surface of the cathode could also make a contribution to lower the interface impedance.This study delivers a different evolution of CEI on NCM811,and the impact of CEI evolution on electrochemical performance when charging to a high voltage.
其他文献
Lithium-sulfur (Li-S) battery is a potential energy storage technology with high energy density and low cost.However,the gap between theoretical expectation and practical performance limits its wide implementation.Herein,we report a nitrogen-doped porous
Thermal runaway is the main factor contributing to the unsafe behaviors of lithium-ion batteries (LIBs) in practical applications.The application of separators for the thermal shutdown has been proven as an effective approach to protecting LIBs from therm
Lithium metal has a high theoretical capacity of 3860 mAh g-1 and a low electrochemical potential (-3.04V vs.H2/H+).Hence,using a lithium anode significantly improves the energy density of a secondary battery.However,the lithium dendrites generated on the
In this work,a comprehensive study on the deliberate molecular design and modifications of electron donors is carried out to elucidate correlations between the methoxy effects and donor configuration of hole-transporting materials (HTMs).Our initial findi
A series of CuO/Ce1-xZrxO2 catalysts (x =0.2,0.4,0.6 and 0.8) are applied to elaborate the effect of the Zr/Ce ratio on the catalytic performance of CO2 hydrogenation to CH3OH.The best catalytic performance is achieved with CuO/Ce0.4Zr0.6O2,exhibiting XCO
Silicon has a large impact on the energy supply and economy in the modern world.In industry,high purity silicon is firstly prepared by carbothermic reduction of silica with the produced raw silicon being further refined by a modified Siemens method.This p
Surface passivation via post-treatment with organic reagents is a popular strategy to improve the stability and efficiency of perovskite solar cell.However,organic passivation still suffers from the weak bonding between organic chemicals and perovskite la
Due to the sufficient ion diffusion channels provided by the large interlayer spacing,layered silicates are widely considered as potential anode materials for lithium ion and sodium ion batteries.However,due to the poor electronic conductivity,the applica
Conventional Li-O2 battery is hardly considered as a next-generation flexible electronics thus far,since it is inflexible,bulk,and limited by the absence of the adjustable cell configuration.Here,we report a binder-free and flexible electrode of x wt％ MoO
Lithium ion capacitors (LICs) have been widely used as energy storage devices due to their high energy density and high power density.For LICs,pre-lithiation of negative electrode is necessary.In this work,we employ a bifunctional Li6CoO4 (LCO) as cathodi