A UV-decomposed method for solving an MPEC problem

来源 :应用数学和力学(英文版) | 被引量 : 0次 | 上传用户:wedededi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A UV-decomposition method for solving a mathematical program with equilibrium constraints(MPEC)problem with linear complementarity constraints is presented.The problem is first converted into a nonlinear programming one.The structure of subdifierential a corresponding penalty function and refults of its UV-decomposition are given.A conceptual algorithm for solving this problem with a superlinear convergence rate is then constructed in terms of the obtained results.
其他文献
The problem of a rigid disk acting with normal force on saturated soil was studied using Biot consolidation theory and integral equation method and the Merchant
The Ni-Sb binary alloy system was thermodynamically assessed using CALPHAD approach in this article.Excess Gibbs energies of solution phases,liquid and fcc phas
The micropowder injection molding technology was investigated to fabricate the microsized gear wheels on a conventional injection molding machine. The feedstock
Longley-Rice channel model modifies the atmospheric refraction by the equivalent earth radius method,which is simple calculation but is not accurate.As it only
(PEO)8LiClO4-SiO2 composite polymer electrolytes(CPEs) were prepared by in-situ reaction, in which ethyl-orthosilicate (TEOS) was catalyzed by HC1 and NH3·H2O,
The effect of electromagnetic stirring on the microstructure and wear behavior of coatings has been investigated. A series of iron-based coatings were fabricate
Molybdenum powders with a diameter of approximately 3 μm were coated with copper using the electroless plating technique in the pH 12.5-13 and temperature rang
Two cooling schemes (continuous cooling and interrupted cooling tests) were applied to investigate the cooling γ precipitation behavior in powder metallurgy su
对某多晶硅厂排放的酸性高浓度含氟废水,采用石灰中和沉淀,以亚铁盐作混凝剂和高分子PAM作絮凝剂用混凝沉降法进行了处理.结果发现在最佳实验条件下,150.00 mL废水中加入CaO
The LY12CZ aluminum alloy specimens were eurroded under the conditions of different test temperatures and exposure durations. After corrosion exposure, fatigue