论文部分内容阅读
Z1410A二工位转台式震压造型机,是在我厂原来生产的SZ3二工位转台式震压造型机基础上改进的。经测验,改进后的造型机各种性能均较原造型机有较大的提高。该机被机械部济南铸锻机械研究所正式命名为Z1410A二工位转台式震压造型机。 Z1410A造型机由五大部分组成:震压机构、回转机构、起模机构、横梁和管路系统。主要改进如下: 1.在龙门架的两侧分别悬挂着新增加的2只容积各为195升的储油罐,储油罐的出油口分别与回转缸的两端相连接。当其中一只储
Z1410A two-station rotary compression molding machine, is the original production in our plant SZ3 two-station rotary table compression molding machine based on the improvement. After testing, the improved shape machine performance than the original molding machine have a greater increase. The aircraft was mechanical Ministry of Jinan forging Machinery Research Institute officially named Z1410A two station turntable compression molding machine. Z1410A molding machine consists of five major components: the pressure mechanism, rotary mechanism, the lifting mechanism, beams and piping systems. The main improvements are as follows: 1. On both sides of the gantry are newly added two additional reservoirs each having a capacity of 195 liters, and the oil outlet of the oil reservoir is respectively connected with the two ends of the rotary cylinder. When one of them is stored