【摘 要】
:
We report an experimental investigation on laser ablation and associated surface structuring of CdZnTe by femtosecond Ti:Sa laser pulses (laser wavelength λ≈8
【机 构】
:
Dipartimento di Fisica “Ettore Pancini”,Universià di Napoli “Federico Ⅱ”,Via Cintia,Ⅰ-80126 Napoli,I
论文部分内容阅读
We report an experimental investigation on laser ablation and associated surface structuring of CdZnTe by femtosecond Ti:Sa laser pulses (laser wavelength λ≈800 nm,≈35 fs,10 Hz),in air.By exploiting different static irradiation conditions,the fluence threshold and the incubation effect in CdZnTe are estimated.Interestingly,surface treatment with a low laser fluence (laser pulse energy E≈5-10 μJ) and number of shots (5≤ N ≤50) show the formation of well-defined cracks in the central part of the shallow crater,which is likely associated to a different thermal expansion coefficients of Te inclusions and matrix during the sample heating and cooling processes ensuing femtosecond laser irradiation.Irradiation with a larger number of pulses (N≈500,1000) with higher pulse energies (E≈30-50 μJ) results in the formation of well-defined laser-induced periodic surface structures (LIPSS) in the outskirts of the main crater,where the local fluence is well below the material ablation threshold.Both low spatial frequency and high spatial frequency LIPSS perpendicular to the laser polarization are found together and separately depending on the irradiation condition.These are ascribed to a process of progressive aggregation of randomly distributed nanoparticles produced during laser ablation of the deep crater in the region of the target irradiated by a fluence below the ablation threshold with many laser pulses.
其他文献
ZrB2 ceramics with various hexagonal BN (hBN) additions up to 37 vol% were reactively densified by spark plasma sintering using powder mixtures containing ZrB2,Z
Motivated by the increasing use of Sn-3.0Ag-0.5Cu (SAC305) solder in electronics worked in marine atmospheric environment and the uneven distribution of Ag3Sn a
An interesting phenomenon of dual S-N fatigue behavior is investigated in a metastable β titanium alloy,Ti-7Mo-3Nb-3Cr-3Al notched cylindrical specimens with a
The martensite transformation of Co-29Cr-6Mo-xCu (Co-xCu,x =0,1.5,2,4,wt%) alloys was investi-gated in order to explore ductile Co-based alloy without Ni for bio
The occurrence and development mechanism of internal local corrosion has always been a controver-sial topic,and especially under flow conditions.In this paper,a
The fatigue properties of titanium alloy short-stems with four different lengths,manufactured by electron beam melting (EBM) technology,were investigated by in
Nanolaminates are composed of nanoscale-thick alternating layers of different materials and their properties are dependent on the individual layers,the layer th
Microstructural modifications and appropriate element doping are necessary to simultaneously enhance the electrical conductivities and reduce the lattice therma
The Mg90Ce5RE5 (RE =La,Ce,Nd) alloys were prepared by a vacuum induction furnace and their microstructure,phase transformation,thermodynamics and kinetics prope
The metallic phase of molybdenum disulfide (M-MoS2) and semiconductor phase of molybdenum disulfide (S-MoS2) was synthesized by hydrothermal method,using cetylt