论文部分内容阅读
Effects of Mechanical Alloying Parameters on the Microstructures of Nanocrystalline Cu-5 wt％ Cr Allo
【机 构】
：
State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Scie
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2013年1期
其他文献
Fe-based amorphous and nanocrystalline coatings were fabricated by air plasma spraying. The coatings were further treated by laser remelting process to improve their microstructure and properties. The corrosion resistance of the as-sprayed and laser-remel
The aim of this study was to improve the cyclic oxidation resistance of In718 superalloy by laser peening(LP). Specimens were treated by LP from one to three times, respectively. The cyclic oxidation tests at 900℃ for periods up to 2 h were conducted. Cha
The degradation mechanisms of cementitious materials exposed to sulfate solutions have been controversial, despite considerable research. In this paper, two methodologies of image analysis based on scanning electron microscope and chemical mapping are use
The dynamic observations of bainitic transformation in a Fe-C-Mn-Si superbainite steel were conducted on a high temperature laser scanning confocal microscope. It is indicated that the mutual intersection of bainite sheaves often occurs during growth of b
Preparation and Spectral Analysis of Gold Nanoparticles Using Magnetron Sputtering and Thermal Annea
Gold (Au) nanoparticles were prepared on Au-film-coated K9 glass and silicon substrates by direct current (DC) magnetron sputtering and thermal annealing treatment. The effects of substrate material, annealing temperature, and time on morphologies of Au n