A Bionic Optimization Technique with Cockroach Biological Behavior

来源 :电子学报(英文版) | 被引量 : 0次 | 上传用户:fqdml
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Many practical engineering problems can be abstracted as corresponding function optimization problems.During the last few decades,many bionic algorithms have been proposed for this problem.However,when optimizing for large scale problems,such as 1000 dimensions,many existing search techniques may no longer perform well.Inspired by the social model of cockroaches,this paper presents a novel search technique called Cooperation cockroach colony optimization (CCCO).In the CCCO algorithm,two kinds of special biological behavior of cockroach,wall-following and nest-leaving,are simulated and the whole population is divided into wall-following and nest-leaving populations.By the collaboration of the two populations,CCCO accomplishes the computation of global optimization.The crucial parameters of CCCO are set by the self-adaptive method.Moreover,a discussion on group model design is provided in this paper.The CCCO algorithm is evaluated with shifted test functions (1000 dimensions).Three state-of-the-art cockroach-inspired algorithms are used for the comparative experiments.Furthermore,CCCO is applied to a real-world optimization problem concerning spread spectrum radar poly-phase.Experiment results show that the CCCO algorithm can be applied to optimize large-scale problems with the good performance.
其他文献
针对吴起油田水平井产量递减快、能量难以补充的问题,对X区长6油藏水平井展开注水矿场试验及见水见效、含水变化、递减规律等开采特征分析,运用雷达图版法和权重系数法从水驱状况、产量变化情况、含水情况、能量补充情况和注水利用情况等5方面,对不同含水阶段的水平井注水效果定量综合评价。结果表明1)吴起长6油藏水平井注水见水见效特征以Ⅲ类为主,含水上升规律为S型和凹型,水平井注水平均单井减缓递减率4.2%。2)依据大量统计图版成果分析,4个重要指标合理界限值是水驱采收率15.0%~20.9%;综合递减率5%~15%;各
渤海明化镇组及馆陶组等浅部泥岩地层井壁失稳严重,影响着钻井安全与时效。利用实验手段全面揭示了浅层泥岩的理化及力学特征(包括水化膨胀特性、吸水扩散性能、力学和强度参数),在此基础上通过半数值半解析的方法求解了非均匀应力情况下浅部泥岩地层的水化应力,以曹妃甸12-6油田一口水平大位移井为例进行了井壁稳定性分析。结果表明1)浅层泥岩水化膨胀较强,吸水量随着离井眼距离增加而减小,时间越长,吸水量越多,达到一定时间后趋于饱和,随吸水量变化地层弹性模量和强度降低;2)浅部泥岩坍塌失稳首先发生在井壁内部1~3 cm处,
A Multicarrier phase-coded (MCPC)waveform design scheme with two steps for Joint radar and communication (JRC) system is developed.Firstly,an integrated MCPC wa
Flexible manifold embedding (FME) is a semi-supervised dimension reduction framework.It has been extended into feature selection by using different loss functio
The Satellite-based augmentation system(SBAS) is intended to provide real-time differential global navigation satellite system corrections with the high accurac
裂缝性礁灰岩底水稠油油藏具有内部断层及裂缝发育、非均质性强、原油黏度高等特点。针对该类油藏后期调整井投产后含水上升快,含水上升规律不明确,无法形成针对性堵水增产措施的问题,利用地质油藏资料和生产动态数据,在生产井含水类型划分及储层裂缝发育程度进行定量表征的基础上,基于改进的层次分析方法,开展了裂缝性礁灰岩底水稠油油藏含水上升主控因素分析研究。结果表明1)生产井含水类型可划分3类,一类井位于构造高部位,含水率随累产油量上升慢;二、三类井位于构造低部位及裂缝发育区,含水率随累产油量上升快。2)目标区块的西北部
本文基于PLC电力系统来分析自动化设计策略。
双锥型旋流分离器的结构参数的改变对其分离效果会产生极大的影响,分析主要结构参数对除油率的影响规律对该设备的设计加工有着重要意义。通过三维建模软件和计算流体力学软件建立了公称直径为50 mm的双锥型水力旋流器经典模型,应用模拟对比的方法分析得出了溢流口直径Do、溢流管深入长度Ls、大锥角α这3个参数变化对压降和除油效率的影响,并利用递进优化的方式优选出最优结构参数。结果表明,当溢流口直径增加至25 mm时可将除油效率提高到94.19%,此时压降为53082.57 Pa;溢流管深入长度95 mm时分离效率为9
复杂山前带表层结构在纵、横向上变化剧烈,单炮能量弱,背景噪声发育,信噪比低,地震初至难以准确拾取。为了提高初至拾取精度及效率,针对单炮初至难以准确识别及初至拾取范围不明确等问题,开展波动方程正演、可控震源预处理及不同初至范围层析反演分析等方面工作。结果表明,波动方程正演模拟方法指导地震单炮的初至拾取,可以避免初至漏拾、错拾现象;可控震源单炮开展最小相位化和反褶积处理,近道初至识别率提高50%以上,可提高单炮初至信噪比;初至偏移距涵盖风化层及1 km左右的折射层时间范围即可满足层析反演精度需求。通过以上方法
大型轴承套圈受椭圆度的影响,在组装成轴承后,其径向游隙值产生了最大值与最小值的问题。目前大型轴承径向游隙是用平均法测量的,其测量点数很少,因而测量精度不够,同时反映不出来径向游隙最大值与最小值。本文设计了一种方法能够精确测量出径向游隙平均值,同时该方法也能够测量出径向游隙最大值与最小值,并找出径向游隙最大值、最小值的方向,从而满足工程实践当中径向游隙精确测量。