论文部分内容阅读
在安装带有溢水槽的缸套时,我们常常可以看到有些修理工粗心大意,错误地将阻水圈装在缸套溢水槽内,再将缸套强行装入机体内,这样往往造成缸套变形甚至破裂。 为了避免阻水圈失效后冷却液渗入油底壳稀释润滑油,南柴D6110Q、南柴X6110、潍坊R4100等柴油机缸套上,在第二、三道阻水圈槽之间设有溢水槽,并与机体上的溢水孔对正。当第一、二道阻水圈失效时,渗漏的冷却液经溢水槽、溢水孔排出机外。南柴D6110Q型柴油机缸套,其阻水圈槽宽4.80mm,深3.00mm,配用截面直径为φ3.8mm、内径为φ116mm的阻水圈,而溢水槽宽3.0mm,深2.0mm。南柴X6100型
When installing a cylinder liner with an overflow tank, we often see some caretakers carelessly installing the water blocking ring in the cylinder liner overflow tank and forcibly inserting the cylinder liner into the machine body. This often results in cylinder liner Deformation or even rupture. In order to avoid the failure of the water block after the coolant into the oil pan dilute the lubricating oil, South Chai D6110Q, South Chai X6110, Weifang R4100 and other diesel engine cylinder liner in the second and third stop ring groove with overflow tank, And with the body of the overflow hole alignment. When the first and second barrier failure, the leakage of coolant through the overflow tank, overflow hole discharge machine. Nanchai D6110Q diesel engine cylinder liner, the water ring groove width 4.80mm, 3.00mm deep, with a cross-sectional diameter of φ3.8mm, an inner diameter of φ116mm water blocking ring, while the overflow tank width 3.0mm, depth 2.0mm. South Chai X6100 type