论文部分内容阅读
论述了一种新型旋流器的开发过程 ,新型旋流器具有双进口、弧锥段体的结构特征 ,公称直径分别为 1 8mm和 2 8mm。通过对新型旋流器进行实验室测试 ,HL2 8型平均分离效率在 90 %以上 ,明显优于国际上正在采用的 Thew型双锥体和Amoco型单锥体旋流器 ;HL1 8型比 HL2 8型旋流器有更好的分离效果 ,突破了国际上通常认为旋流器的直径不能小于 2 8mm的说法 ,既提高了离心分离因数 ,又解决了油滴破碎问题 ,为以后的油水旋流分离器的发展指出了一条新途径。
The development process of a new type of cyclone is discussed. The new type of cyclone has the features of dual inlet and arc cone sections with nominal diameters of 18mm and 28mm respectively. Through the laboratory testing of the new cyclone, the average separation efficiency of HL2 8 is over 90%, which is obviously superior to Thew double cone and Amoco single cone hydrocyclone which are being used in the world. HL1 8 is better than HL2 8 cyclone has a better separation effect, breaking the international community is generally believed that the diameter of the cyclone can not be less than 2 8mm of the statement, both to improve the centrifugal separation factor, but also solve the problem of oil droplets broken for the oil and water spin later The development of flow separators points to a new way.