论文部分内容阅读
配置电梯,对建筑物的井道高度有相应的尺寸要求,其中提升高度是上下正常使用的运行高度,完全由建筑物需要确定(即底层端站楼面至顶层端站楼面的垂直距离),此外,在底层端站楼面以下,应当预留足够的空间,与层站的井道平面一致,一定深度(称为底坑深度)的安全空间;同样地,在顶层端站楼面以上,机房地面板楼(无机房时为顶层顶板)以下,也应当预留足够的空间,与层站的井道平面一致,一定高度(称为顶层高度)的安全空间。电梯的底坑深度和顶层高度,由所配置的电梯规格参数确定并需要建筑空间的保证,主要根据所需要配置的电梯主参数(额定载重量和额定速度)和轿厢与对重的结构高度而从安全角度考虑提出允许的最少空间要求,其中的极限开关的设置和安全保护作用所需要的空间必需保证。
Elevator configuration, the hoistway height of the building has the appropriate size requirements, where the lifting height is up and down the normal use of the operating height, completely determined by the building needs (ie, the bottom end of the floor to the top floor of the terminal floor vertical distance) In addition, below the ground floor of the terminal, there should be enough space reserved for safety, which is consistent with the hoistway plane of the landing and has a certain depth (referred to as the depth of the pit); similarly, above the floor of the terminal, Ground floor (no machine room when the roof of the roof) below, should also be reserved enough space, consistent with the hoistway plane, a certain height (known as the top level of space) safety. The depth of the pit and the height of the top of the elevator are determined by the configured elevator specifications and require the guarantee of the building space. The elevator main parameters (rated load and rated speed) and the structural height of the car and the counterweight From the security point of view to consider the minimum allowable space requirements, including the limit switch settings and security required space required to ensure.