【摘 要】
：
In addition to the hexagonal crystals of class 6 mm, many piezoelectric materials (e.g., BaTiO3), piezomagnetic materials (e.g., CoFe2O4), and multiferroic com
论文部分内容阅读
In addition to the hexagonal crystals of class 6 mm, many piezoelectric materials (e.g., BaTiO3), piezomagnetic materials (e.g., CoFe2O4), and multiferroic com-posite materials (e.g., BaTiO3-CoFe2O4 composites) also exhibit symmetry of transverse isotropy after poling, with the isotropic plane perpendicular to the poling direction. In this paper, simple and elegant line-integral expressions are derived for extended displace-ments, extended stresses, self-energy, and interaction energy of arbitrarily shaped, three-dimensional (3D) dislocation loops with a constant extended Burgers vector in trans-versely isotropic magneto-electro-elastic (MEE) bimaterials (i.e., joined half-spaces). The derived solutions can also be simply reduced to those expressions for piezoelectric, piezo-magnetic, or purely elastic materials. Several numerical examples are given to show both the multi-field coupling effect and the interface/surface effect in transversely isotropic MEE materials.
其他文献
Uniaxial tension tests and hole-expansion tests were carried out to determine the influence of silicon on the microstructures, me-chanical properties, and stret
In a typical process, C-Mn steel was annealed at 800°C for 180 s, and then cooled rapidly to obtain the ferrite-martensite micro-structure. After pre-straining
Zeolite NaA was successfully prepared from nickel laterite residue for the first time via a fusion–hydrothermal procedure. The structure and morphology of the
生态文明建设是党在十八大报告中提出的一个重要命题,是全面建成小康社会的新要求之一.在经济全球化快速发展的今天,生态文明建设面临着十分严峻的挑战,因此生态文明建设具有
Monolayer and bilayer coatings of TiAlN, AlCrN, and AlCrN/TiAlN were deposited onto tungsten carbide inserts using the plasma enhanced physical vapor deposition
水汽吸收分布于整个中红外波段,它的存在干扰红外光谱的定量分析。文章介绍了一种从傅里叶变换红外光谱仪的测量数据中扣除水汽干扰信号的新方法。该方法首先通过气象参数测
A method of synthesizing Ni-based catalysts supported onα-Al2O3-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides
Microstructure and texture evolution in commercial-purity Zr 702 during cold rolling and annealing was investigated by optical microscopy, transmission electron
采用粉末熔化工艺(PMP)制备YBa2Cu3O7-x先驱粉末。研究了在加热过程中加热速率和保温时间对其相成分的影响,并对粉末的显微结构进行了分析。通过高温X射线衍射仪原位研究了40
The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the