在云母纸浸胶后,要裁剪成不同尺寸的纸张来进行云母板的排板,过去引进的裁剪设备是通过剪板机改造的,笨重,而刀口是剪切钢板用的,动力部分用了8个牵引磁铁带动,剪切过程无法达到自动控制,纸张经常因剪不断而卡在剪切机上,这不仅加大了人员的劳动强度还增加了操作误差,后来许多员工宁愿人工切纸,也不愿使用设备,这样就降低了生产效率。 In the mica paper dipped, to be cut into different sizes of paper to mica board row board, the past introduction of cutting equipment is modified by the shears, bulky, and the blade is used to cut steel, the power part of the Driven by 8 traction magnets, the cutting process can not reach the automatic control. The paper often clings to the shearing machine due to shearing, which not only increases the labor intensity but also increases the operating error. Later, many employees prefer to cut the paper manually, Reluctant to use the equipment, thus reducing the production efficiency.