PS-15动平衡机桥架原结构如图1,由V型块1、弹簧片2、磁力传感器3、传感器螺杆4、螺杆5和压紧块6等组成。当做动平衡时,将待平衡的转子放在V型块1上,由于不平衡量的影响,通过弹簧片2振动,传感器螺杆4随之振动。当停止时,需扭动螺杆5,使压紧块6压紧V型块1。再做动平衡时,再扭动螺杆5,松开压紧块6。这样锁紧和 PS-15 Balancing Machine Bridge The original structure shown in Figure 1, the V-block 1, the spring 2, the magnetic sensor 3, the sensor screw 4, screw 5 and compacting block 6 and other components. As a dynamic balance, the rotor to be balanced on the V-block 1, due to the impact of unbalance, by the spring 2 vibration, the sensor screw 4 vibration. When stopped, the screw 5 needs to be twisted to press the pressing block 6 against the V-block 1. To do dynamic balance, then twist the screw 5, release the compact block 6. This lock and