Glasses based on ZnO-Bi2O3-B2O3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order t
To gain a deep insight into the hot drawing process of aluminum alloy sheet, simulations of cylindrical cup drawing at elevated temperatures were carried out wi
The dynamic recrystallization and carbides precipitation of the Cr-Co-Mo-Ni bearing steel were investigated by hot compression tests performed at temperatures r
The superplasticity of Al-6Mg-0.4Mn-0.25Sc-0.12Zr and Al-6Mg-0.4Mn-0.25Er-0.12Zr(mass fraction,%)alloys sheet was investigated,and the effect of Sc and Er was dis
Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modif
The through-thickness corrosion inhomogeneity of 7050-T7451 Al alloy thick plate was studied using immersion tests, potentiodynamic polarization, electrochemica
Ultrasonic treatment and hydrothermal method were applied in the traditional homogeneous precipitation for nano-TiO2 preparation, which was used as carrier mate