ICAM-1 depletion in the center of immunological synapses is important for calcium releasing in T-cel

来源 :JournalofInnovativeOpticalHealthSciences | 被引量 : 0次 | 上传用户:www_acafa_com
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
T-cell activation requires the formation of the immunological synapse (IS) between a T-cell and an antigen-presenting cell (APC) to control the development of the adaptive immune response. However, calcium release, an initial signal of T-cell activation, has been found to occur before IS formation. The mechanism for triggering the calcium signaling and relationship between calcium release and IS formation remains unclear. Herein, using live-cell imaging, we found that intercellular adhesion molecule 1 (ICAM-1), an essential molecule for IS formation, accumulated and then was depleted at the center of the synapse before complete IS formation. During the process of ICAM-1 depletion, calcium was released. If ICAM-1 failed to be depleted from the center of the synapse, the sustained calcium signaling could not be induced. Moreover, depletion of ICAM-1 in ISs preferentially occurred with the contact of antigen-specific T-cells and dendritic cells (DCs). Blocking the binding of ICAM-1 and lymphocyte function-associated antigen 1 (LFA-1), ICAM-1 failed to deplete at the center of the synapse, and calcium release in T-cells decreased. In studying the mechanism of how the depletion of ICAM-1 could influence calciumrelease in T-cells, we found that the movement of ICAM-1 was associated with the localization of LFA-1 in the IS, which affected the localization of calcium microdomains, ORAI1 and mitochondria in IS. Therefore, the depletion of ICAM-1 in the center of the synapse is an important factor for an initial sustained calcium release in T-cells.
其他文献
分析了二阶量化产生的误差, 提出了一种基于模拟退火算法的优化算法, 对二阶量化的相位数据进行优化, 改善其输出光场, 减小二阶量化带来的误差。仿真结果表明:优化过后DOE输出光场的不均匀性由41.92%降至23.18%, 误差函数由28.74%降至20.47%, 可见提出的算法在减小DOE二阶量化误差方面具有一定的应用价值。
基于特定的轻量化形式和支撑结构, 采用有限元方法研究了口径为500 mm的空间SiC反射镜的背部中心支撑特性.通过分析镜体结构参量对反射镜性能的影响, 确定了最佳的支撑孔直径与反射镜口径的比例为0.23, 指出对不同口径的反射镜需通过优化确定最佳的背部形状, 当重力沿径向作用时, 增大支撑深度有利于提高面形准确度.支撑结构分析结果表明, 柔性连接件底部螺栓圆半径是影响温变载荷工况下的面形准确度和反射镜组件的一阶固有频率的关键因素, 要确定最佳的底部螺栓圆半径需综合考虑面形准确度和结构基频两方面的指标要求;
Huge computational complexity of multiview video plus depth (MVD) coding is an obstacle for putting MVD into applications. A fast macroblock mode selection algorithm is proposed to reduce the computational complexity of multiview depth video coding. The p