【摘 要】
:
In this work, both the thermal expansion and electrical conductivity of nanocrystalline La2Mo2O9 were studied.The nanocrystalline powder of La2Mo2O9 was obtaine
【机 构】
:
Key Laboratory of Rare Earth Chemistry and Physics
论文部分内容阅读
In this work, both the thermal expansion and electrical conductivity of nanocrystalline La2Mo2O9 were studied.The nanocrystalline powder of La2Mo2O9 was obtained by sol-gel method, and with the help of SHP (superhigh pressure)up to 4.5 × 104 atm at 700 ℃ for a short time, and the nanocrystalline powder was densified without obvious particle size growth. The electrical conductivity of nanocrystalline La2Mo2O9 was one orderof magnitude lower than that of the microcrystalline sample at the same temperature. Owing to the phase transition, the microcrystalline La2Mo2O9 has an abrupt increase of thermal expansion with a peak value of 48 × 10-6 K-1 at 556 ℃. For the nanocrystalline material, the peak value increases to 112 × 10-6 K-1 at 520 ℃. On the other hand, above 600 ℃ the significant growth of particle size of the nanocrystalline La2Mo2O9 was observed, accompanying by a tremendous increase of thermal expansion with a peak value of third higher than that of La2Mo2O9.
其他文献
The influence of surface pre-treatments, shot-peening (SP) and laser remelting (LR), on oxygen permeation behaviors of titanium alloy TC11 was investigated. Opt
Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface
Glass and glass-ceramic materials were investigated as SOFC seals at 800 ~ 850 ℃. The material was based on the glass and glass-ceramic in the BaO-CaO-Al2O3-SiO
The effects of yttrium and cerium on microstructures and properties of Nb-Si system composites were investigated by scanning electron microscopy( SEM), energy d
Surface finishing is one of the most important processes in mould and die making. This process is necessary not only for smoothing the surface of die or mould,
The application of MicroLogixTM 1200 PLC made by American AB Company in battery automatic production line located in Inner Mongolia Rare Earth Ovonic High-Power
The cavitation erosion of Ti-46Ni-9Nb alloy, Ti-24Al-15Nb-1Mo alloy and 0Cr13Ni5Mo stainless steel has been investigated in tap water by using rotating disc equ
The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and t
The microstructure of the titanium component in hydroxyapatite (HA)-Ti asymmetrical functionally graded biomaterial (FGM) fabricated by powder metallurgical pro
Hydrogenated diamond-like carbon (DLC) films were deposited on Si substrate using plasma enhanced chemical vapor deposition(PECVD) technique with CH4 plus H2 as