本钢炼钢厂薄板坯连铸机在开浇初期,特别是在低碳钢的生产时,结晶器内几乎每个浇次开浇时都会产生冷齿,由于薄板坯铸机拉速高,冷齿现象极易产生漏钢的事故,并产生7m左右的废坯,增加了生产成本。因此主要对能够引起冷齿的生产和设备各种相关的因素进行分析,并通过生产实践的方法找出最佳的解决办法。 Bengang steel mill thin slab caster at the early pouring, especially in the production of low carbon steel, pouring poured almost every pouring in the mold will produce cold teeth, the thin slab casting machine pulling speed is high, Cold tooth phenomenon can easily lead to steel leakage accidents, and produce about 7m waste, increasing the cost of production. Therefore, it mainly analyzes the various factors that can cause the production of cold teeth and the equipment, and finds out the best solution through the method of production practice.