论文部分内容阅读
Characteristics of the Structure and Properties of ZnSn03 Films by Varying the Magnetron Sputtering
【机 构】
：
Laser Advanced Manufacturing Technology Center, School of Materials and Metallurgy, University of Sc
【出 处】
：
金属学报（英文版）
【发表日期】
：
2016年9期
其他文献
Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based
As-cast microstructure of a designed polycrystalline Ni3Al-based superalloy is characterized using optical microscope,scanning electron microscope,transmission electron microscope equipped with selected area diffraction system,and the intermetallic phase
The influence of Nb content on the microstructure and cryogenic mechanical properties of a 7％Ni steel was investigated within the Nb content range from 0 to 0.05％. The microstructure was characterized by optical microscope, scanning electron microscope, t
Effect of Open Porosity of Y2O3 Ceramic on the Apparent Contact Angles and Interactions Between Ti47
The effect of open porosity of Y2O3 ceramic on the apparent contact angle and interaction between molten Ti47Al alloy and Y2O3 ceramic substrates under pure Ar was investigated by using a sessile drop method at 1600 ℃.As the open porosity increased from 9
Carbon Dioxide Sequestration via Steelmaking Slag Carbonation in Alkali Solutions: Experimental Inve
Carbon dioxide mineral sequestration with steelmaking slag is a promising method for reducing carbon dioxide in a large-scale setting.Existing calcium oxide or calcium hydroxide in steelmaking slag can be easily leached by water,and the formed calcium car
Wear behaviors of 3Cr2W8V and GH4169 with H70, including surface property, wear performance and friction work, were investigated. 3Cr2W8V and H70 friction pair suffered severer wear and surface damage than GH4169 and H70 friction pair. The wear process ha
Synthetic Effects of Frequency and Duty Ratio on Growth Characteristics, Energy Consumption and Corr
The synthetic effects of frequency and duty ratio on growth characteristics and corrosion properties of coating on Ti6Al4V fabricated by microarc oxidation are investigated comprehensively.Under the condition of uniform cumulating time of positive impulse
Precipitation behavior of (Ti,V,Mo)C and microstructural evolution of the ferritic Ti-V-Mo complex microalloyed steel were investigated through changing coiling temperature (CT). It is demonstrated that the strength of the Ti-V-Mo microalloyed steel can b
The corrosion behavior of Al-5 at.％ Cr,Al-5 at.％ Si,Al-5 at.％ Mo and Al-5 at.％ Ti produced via casting and Al-5 at.％ Cr produced by high-energy ball milling and subsequent consolidation by cold pressing was studied using potentiodynamic polarization and s
Corrosion Performance of Carbon Steel in CO2 Aqueous Environment Containing Silty Sand with Differen
Corrosion performance of carbon steel in CO2 aqueous environment containing silty sand with different sizes was investigated by immersion tests and electrochemical measurements.Silty sand could form an adsorption layer on steel surface in initial period,a