静电复印机是一种比较精密的光学机械和电子设备,能否正确地维护保养与调试,是保证复印品质量、减少故障和延长使用寿命的重要手段。一、电路调试排除故障后,应按静电复印机的要求进行必要的测量和调整。 (一) 电源调试 1.通电之前,应先测量电路电阻。电源插头两端的电阻约为几十欧姆。插头对地阻值应大于10MΩ,如 Electrostatic copier is a relatively sophisticated optical machinery and electronic equipment, can correctly maintain and debug, is to ensure the quality of copy, reduce the failure and extend the service life of an important means. First, the circuit debug troubleshooting, the electrostatic copier should be required to make the necessary measurements and adjustments. (A) power debugging 1. Before the power, the circuit resistance should be measured. The resistance across the power plug is approximately a few tens of ohms. Plug to ground resistance should be greater than 10MΩ, such as