我们的产品均需喷涂醇酸铁红底漆后再喷醇酸磁漆和硝基纤维磁漆做为面漆,经工艺改进后,以电泳漆打底,然后喷一层醇酸磁漆和一层硝基磁漆做为面漆。但是经常出现咬底现象,使漆膜起皱附着不牢,由此,曾造成生产上的障碍,经多次试验,用加桐油的方法对漆进行了改进,加入量在1～2%范围内较好,不仅解决了咬底现象,也提高了漆膜 Our products are required to spray alkyd ferric red primer before spraying alkyd enamel and nitrocellulose enamel as a top coat, the process improvement, to electrophoretic paint primer, and then spray a layer of alkyd enamel and a layer of nitrate Base enamel as a top coat. But often bite bottom phenomenon, so that the paint film wrinkle adhesion is not strong, thus, has caused the production of obstacles, after many tests, with the method of adding tung oil on the paint was improved, adding the amount of 1 ~ 2% range Within the better, not only solved the bite phenomenon, but also improve the film