Synthesis of RE-Ag,AI-RE-doped sol-gel glass and films for solar cells

来源 :稀土学报 | 被引量 : 0次 | 上传用户:liongliong481
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The paper dealt with the study of fluorescence properties of sol-gel systems doped with rare-earth ions and co-doped with silver.The general problem for these types of inorganic phosphors was a very low absorbance in the visible range.Therefore,a sensitizer of luminescence of the rare-earth ions should be selected and used.The sensitizer should possess a good absorbance in the visible range and strong interaction with the rare-earth ions.In this study silver ions were selected as the sensitizer.
其他文献
Macrosegregation in Fe-0.8 wt pct C alloy solidifying with equiaxed morphology was numerically simulated. Based on a two-phase volumetric averaging approach, he
The structural,electronic and elastic properties of YCu compound in the B2 (CsC1) phase were investigated using the density functional theory (DFT) within the g
Two near a titanium alloys, Ti-5.6AI-4.8Sn-2.0Zr-lMo-0.35Si (1#) and Ti-6.0AI-4.8Sn-2.0Zr-1Mo-0.35Si (2#), were solution-treated in the upper α+β phase fields
Anodizing of AZ31 Mg alloy in NaOH solution by co-precipitation of cerium oxide was investigated. The chemical composition and phase structure of the coating fi
We reported on the high pressure luminescence spectra of polycrystalline Eu-doped GaN material synthesized in the reaction between alloys of gallium, bismuth an
Electrochemical tests were undertaken to determine the optimum conditions in seawater for corrosion protection of friction stir-welded 5083-O Al alloy. Polariza
The effect of potassium pyrophosphate in the electrolyte on plasma electrolytic oxidation (PEO) process for AZ91 Mg alloy was investigated. The morphologies and
YBa2Cu3O7-x(YBCO) films were fabricated on an LAO substrate using the trifluoroacetic acid-metal organic deposition (TFA-MOD) method and the effects of the humi
To improve the sliding wear resistance of AZ91D magnesium alloy, Cu-based amorphous composite coatings made of Cu47Ti34Zr11Ni8 and Cu47Ti34Zr11Ni8+20 wt pct SiC
Truss core sandwich panels reinforced by carbon fibers were assembled with bonded laminate facesheets and carbon fiber reinforced truss cores. The top and botto