论文部分内容阅读
激光印刷机扫描光学系统的成像质量分析与研究
【机 构】
：
华中工学院
【出 处】
：
中国激光
【发表日期】
：
1988年15期
其他文献
基于反谐振反射光波导模型和模式耦合模型分析了负曲率空芯光纤的导光机理,利用有限元法模拟计算了圆形管环负曲率空芯光纤的结构参数对基模限制损耗的影响。通过分析嵌套环优化基模限制损耗机理,发现嵌套环之间的空气层对反谐振反射也有贡献,且嵌套环在不同管环数量下对限制损耗优化的影响不同。设计了一种纤芯直径不超过20 μm的低限制损耗负曲率空芯光纤,其在1550 nm处的限制损耗小于1 dB/km,可保证单模传输。
We propose that domain inversion can be directly induced by femtosecond laser both theoretically and experimentally, which opens a path to achieve three-dimensional (3D) nonlinear crystal with a period in sub-micron-scale. A simulation of domain inversion
In this Letter, we discuss Raman–Nath acousto-optic diffraction, and a new model of Raman–Nath acousto-optic diffraction is presented. The model is based on the individual and simultaneous occurrences of phase-grating diffraction and the Doppler effect an
为了解决激光粉末床熔化技术制备的钨材料中存在的裂纹问题,本文提出了一种通过原位反应形成亚微米尺度亚结构强化相的强化方式减少钨中裂纹的新思路。采用激光粉末床熔化技术成功制备了钨-5%(质量分数)碳化钽低合金钨块体,通过调整激光参数,钨-5%碳化钽块体的孔洞明显减少,裂纹密度相较纯钨显著降低。在钨-碳化钽中形成了大量形状不规则的亚微米级尺度的亚结构,通过微观组织分析在合金中发现了于增材制造原位反应过程中形成的碳化钨相,这些碳化钨相主要聚集于亚结构的胞壁处。钨-碳化钽的显微硬度(666 HV)较纯钨(400 H
A new integrated scheme based on resource-reservation and adaptive network flow routing to alleviate contention in optical burst switching networks is proposed. The objective of the proposed scheme is to reduce the overall burst loss in the network and at
设计了一种工作在光波段的新型四重对称的双层手征结构，通过数值模拟得到透射系数和反射系数，反演计算了结构的圆二色性、旋光角、手征参数和折射率。结果表明该结构在谐振波长附近具有很强的旋光性，并且在椭偏度为零时，即透射光变成完全线偏振光时，旋光角达到了55°；在一定波段内可以实现左旋圆偏振光(LCP)和右旋圆偏振光(RCP)的负折射率，且不需要介电常数和磁导率同时为负，更重要的是，实现负折射率的左旋圆偏振光(LCP)具有较宽的频带，不局限于谐振波长附近，在椭偏度为零时，折射率也为负。考虑到具体的实验制作，对加衬
ZnS thin films are deposited on porous silicon (PS) substrates with different porosities by pulsed laser deposition (PLD). The photoluminescence (PL) spectra of the samples are measured at room temperature. The results show that the PL intensity of PS aft
Combing the time-correlated single photon counting (TCSPC) with fluorescence lifetime imaging microscopy (FLIM) provides promising opportunities in revealing important information on the microenvironment of cells and tissues, but the applications are thus