论文部分内容阅读
Weldability and SAW welding wire of X80 pipeline steel
【机 构】
：
HuazhongUniversityofScienceandTechnology,WuhanIronandSteel（Group）Corporation
【出 处】
：
China Welding
【发表日期】
：
2006年1期
【基金项目】
：
The authors wish to express their gratitude to the experts in pipeline steel research team in Technology Center of Wuhan Iron and Steel （Group） Corporation （WISC0） for their help.
其他文献
<正>The key problem for numerical simulation of plasma arc welding(PAW)process is to develop a suitable and adaptive volumetric heat source mode which reflects
Microstructure and mechanical properties of butt joints of QCr0.8／1Cr21NiSTi equal-thickness dissimi
Butt joints of QCrO. 8/1Cr2lNiSTi equal-thickness dissimilar materials were obtained by electron beam welding with fixed accelerating voltage 60 kV and focus cu
Effects of current waveform parameters during droplet transfer on spatter in high speed waveform con
Aim at improving the stability of the Short-circuiting Gas Metal Arc Welding ( GMA W-S) process for the enhanced speed usage, effects of current waveform parame
The microstructure and hardness of the HAZ in a 800 MPa grade ultra-low-carbon microalloyed steel were studied.The results indicate that the heat affected zone
Two mathematical models are built to study the effects of the fluid flow on thermal distributions of the gas tungsten arc welding(GTAW) process. One model is ba
DD6 alloy was bonded by transient liquid phase (TLP) diffusion bonding. The main compositions of the interlayer alloy employed were similar to those of the base
Effects of alloy elements on the microstructure and crack resistance of Fe-C-Cr weld surfacing layer were investigated. The results show that microstructures of