Determination of Neutron Irradiation-Induced Phosphorus Segregation on Grain Boundaries in a P-doped

来源 :材料科学技术学报 | 被引量 : 0次 | 上传用户:ilqiqi2010
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Irradiation-induced impurity segregation to grain boundaries is one of the important radiation effects on materials.For this reason, phosphorus segregation to prior austenite grain boundaries in a P-doped 2.25Cr1Mo steel subjected to neutron irradiation is examined using field emission gun scanning transmission electron microscopy (FEGSTEM) with energy dispersive X-ray microanalysis (EDX). The steel samples are irradiated around 270 and 400℃, respectively.The irradiation dose rate and dose are ~1.05×10-8 dpa/s and ~0.042 dpa respectively for 270℃ irradiation, and 1.7×10-8 dpa/s and 0.13 dpa respectively for 400℃ irradiation. The FEGSTEM results indicate that there is no apparent phosphorus segregation during 270℃ irradiation but there is some during 400℃ irradiation.
其他文献
The key technology and the main mechanism of microcrystallizing leucite to reirforce dentalglass ceramics were investigated. The feedstock powders were selected
The experimental researches on the chemical deposition of Ni-Mo-P amorphous alloys were carried out by adding Na2 MoO4 into acidic solutions. The optimum techno
The changes in mechanical properties and fracture toughness by dynamic loading were investigated with experiments.The parameter R, which can reflect the effect
The oxidation behavior of Ni-Cr-Al-Y coating produced by multi-arc ion plating with and without an enamel coating was investigated in flow oxygen and oxygen con
Cerium addition plays an important role in sintering, transformation and phasicochemical properties of cordierite ceramics. The present work aims at studying th
The fabrication process of Sm2O3 doped CeO2 reinforced Ti3AlC2 nano composites including the nano particle dispersion process by a hetero-coagulation process wa
Fine ground powders of Nd-Fe-B sintered magnet bulks(particle size=46~125 μm in diameter) were coated and alloyed with Yb metal by sorbing them. A significant r
This paper proposes a new untraceable Partially Blind Signature scheme which is a cross between the traditional signature scheme and the blind signature scheme.
Ferrography is deemed as one of the most effective methods for wear particle analysis and failure diagnosis. By analyzing the configuration, content and composi
Room temperature deformation behavior of A1-8Fe-2Mo-2V-1Zr alloy produced by spray forming and subsequent warm-extrusion at 693 K and/or rolling at 423 K was in