【摘 要】
：
In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by dynamic shear rheology (DSR), fluoresc
【机 构】
：
Key Laboratory of Highway Construction and Maintenance Technology in Loess Region of the Ministry of
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by dynamic shear rheology (DSR), fluorescence microscope (FM), atomic force microscope (AFM), the fracture-healing-re-fracture test and molecular simulations. The experimental results indicated that the self-healing capability of ASP increased with increasing heating time and temperature. Furthermore, the addition of siloxane could improve the reaction energy barrier and complex modulus, and it is believed that the self-healing is a viscosity driven process, consisting of two parts namely crack closure and properties recovery. Contact angle of ASP increased with the increasing siloxane content and it deduced that the siloxane could improve the hydrophobic performance of ASP and the ASP molecule model could simulate well the self-healing mechanism and hydrophobic performance of ASP.
其他文献
The wetting behavior of Cu-Ti powder compacts with 22 wt ％ Ti and 50 wt ％ Ti on carbon materials, including graphite and carbon fiber reinforced carbon composites (CFC), has been investigated in a vacuum using the sessile drop method. The equilibrium cont
Diffusion bonding between Al and Cu was successfully performed by hot isostatic pressing (HIP). To improve the strength of diffusion bonding joint, pure nickel foils with different thickness were used as intermediate layer. Microstructure of the interface
A high strength self-compacting pervious concrete (SCPC) with top-bottom interconnected pores was prepared in this paper. The frost-resisting durability of such SCPC in different deicing salt concentrations (0%, 3%, 5%, 10%, and 20%) was investigated. The
The phosphorus slag (PS) can be used as a supplementary cementitious material due to its potential hydrating activity. However, its usage has been limited by its adverse effects, including prolonged setting and lowered early-stage strength. In this study,
In order to investigate the effect of the thickness on the electrical conductivity of yttria-stabilized zirconia (YSZ) film, the nanocrystalline columnar-structured YSZ film with thickness of 0.67-2.52μm was prepared by magnetron sputtering through contro
The influence of replacement level of calcined coal-series kaolin (CCK) on hydration of ordinary Portland cement (OPC) was studied by X-ray diffraction(XRD)/Rietveld method. X-ray diffraction/Rietveld method was used to quantify the crystalline phase comp
A new appraisal method (QDA, quasi-distribution appraisal) which could be used to evaluate the finite element analysis of multi-functional structure made of honeycomb sandwich materials is developed based on sub-section Bezier curve. It is established by
Concrete creep under both static and cyclic loading conditions was investigated. Four groups of high-strength high-performance concrete (HSHPC) prism specimens were fabricated, and three of these specimens were loaded periodically by the MTS Landmark Fati
The friction reducing properties of sulfonated graphene as a lubricating additive were investigated using a four-ball machine tester with high carbon chromium bearing steels GCrl5 (SAE52100)friction pairs.The microscopic morphology,elemental composition,a