三十年前,奥穆科公司研制出拉杆式结构的水平分模平锻机(图1)。拉杆式结构的水平分模平锻机具有下列优点: 1.便于接近模具区间,操作方便,换模迅速,简便; 2.由于工作模具区间可以从三个方向接近,所以送料方便,便于观察; 3.工件由一个型槽移向另一个型槽时,操作者只需将工件提升相当于棒料直径一半的尺寸就行; 4.短工件放入下模模内,模具闭合之前不必被夹紧; 5.拉杆式结构的水平分模平锻机,取消 Thirty years ago, OMEGO developed a lever-type horizontal split-platen forging machine (Figure 1). Tie rod structure of the horizontal parting forging machine has the following advantages: 1. Easy access to the mold section, easy to operate, change the mold quickly and easily; 2. Because the working mold section can be approached from three directions, so easy to feed, easy to observe; 3. When the workpiece is moved from one groove to another groove, the operator only needs to lift the work piece to the size corresponding to half the diameter of the bar. 4. The short work piece is put into the lower die without being clamped before the die is closed ; 5. Tie rod structure level points forging flat forging machine, cancel