粉末粒度对Ti-35A1多孔材料孔结构的影响

来源 :粉末冶金材料科学与工程 | 被引量 : 0次 | 上传用户:wangwenhu8
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
粉末粒度是影响Ti-35Al多孔材料孔结构的主要因素之一.本文采用元素粉末反应合成工艺制备Ti-35Al 多孔材料,在其它制备参数一定的条件下,系统研究Ti/Al元素粉末的粒度与Ti-35Al多孔材料的孔隙度、孔径和透气度等孔结构参数之间的定量关系.结果表明:粉末粒度是决定Ti-A1合金多孔材料最大孔径的主要因素,多孔体最大孔径dm与粉末粒径dp之间严格遵循dm-0.54dp的直线变化规律;Ti-Al合金多孔材料的透气度随粉末粒度的增加呈线性关系递增;Ti-Al合金多孔材料中,孔隙的连通程度随孔隙度的增加而大幅度增加,当合金总孔隙度达到45%以上时,开孔隙度所占的比例达到90%以上;在本实验18~125 μm的整个粒度范围内,Ti-Al合金多孔材料的透气度K与开孔隙度θ和最大孔径dm之间严格满足Hagen-Poiseuille方程,Ti-Al合金多孔材料的透气性能和孔结构性能参数之间存在统一的普适方程:K=0.022 9 dm2θ.
其他文献
This paper proposes a novel clamping device for leveling equipment mounted on offshore oil platform jacket,which solves the problem of leveling equipment clampi
As the refiner or modifier,the master alloys containing high concentration phosphor are widely used in preparing eutectic or hypereutectic Al-Si alloys.To study
利用不同蔗糖浓度、硼酸浓度、Ca2+浓度、温度对6个不同熟性的大庥品种的花粉进行萌发研究,结果表明:大麻花粉培养以15%蔗糖+80 mg/L硼酸的液体培养基时花粉的萌发率最高.花
试验对20只宣城麻黄鸡在放养和笼养条件下腿部肌肉品质进行了测定,结果表明:(1)笼养组腿肌亮度(L)、黄度(b)分别较放养组高4.23%和32.05%,差异显著(P<0.05);蒸煮损失、硬度、
Differential evolution (DE) algorithm has attracted more and more attention due to its fast optimization performance and good stability.When DE algorithm is app
Coordinated multi-point transmission and reception (CoMP) for single user,named as SU-CoMP,is considered as an efficient approach to mitigate inter-cell interfe
Abstract:Arc pressure is one of the key factors for variable polarity plasma arc(VPPA) and welding pool formation.In this paper,VPPA pressure is measured by pre
Modern datacenter and enterprise networks require application identification to enable granular traffic control that either improves data transfer rates or ensu
Further development of the technology for making moulding and core sands will be strictly limited by tough requirements due to protection of the natural environ
Feature selection is always an important issue in the visual SLAM (simultaneous location and mapping)literature.Considering that the location estimation can be