为探讨桉树木材材性与中密度纤维板生产工艺的关系 ,进行了板材密度、施胶量与产品性能的研究。结果认为 :桉树中密度纤维板的密度以 0 82g/cm3 左右较为合适 ;此外 ,为满足桉树中密度纤维板静曲强度的要求 ,施胶量应不低于 10 %。为了增大静曲强度建议添加防水剂 ,并采用混合树种的纤维作原料 In order to explore the relationship between the wood properties of eucalyptus and the production process of medium density fiberboard, the research on the density of board, the amount of sizing and the product performance were carried out. The results show that: Eucalyptus MDF density of about 0 82g / cm3 is more appropriate; In addition, in order to meet the requirements of eucalyptus MDF bending strength, sizing amount of not less than 10%. In order to increase the static strength recommended to add waterproofing agent, and the use of mixed species of fiber as raw material