论文部分内容阅读
机械加工零件的毛刺,不仅影响产品的美观,而且直接影响产品的性能与寿命。电解去毛刺的优点如下: 1.无切削力,不会造成零件的受力变形,加工表面质量高、无残余应力,金相组织不被破坏。 2.去除毛刺后的棱边可形成光滑圆角,表面粗糙度可达到Ra0.8左右。 3.不仅可去除外表面毛刺,而且还可方便地去除内部型腔及交叉孔毛刺。即可去除小毛刺,也可去除大毛刺。对其它部位无腐蚀。 4.生产率高,一般零件只需10—20秒即可将
Machining parts of the burr, not only affects the appearance of the product, but also directly affect product performance and life expectancy. Electrolytic deburring advantages are as follows: 1. No cutting force, will not cause the parts of the force deformation, the processing surface of high quality, no residual stress, the microstructure is not damaged. 2. After removing the burr edge can be formed smooth rounded, surface roughness can reach about Ra0.8. 3. Not only to remove the outer surface of the burr, but also can easily remove the internal cavity and cross-hole burr. You can remove the small burr, but also remove the big burr. No corrosion on other parts. 4 high productivity, general parts only 10-20 seconds can be