论文部分内容阅读
Ballistic Performance and Damage Characteristics of Chemical Vapor Infiltration Quasi 3D-Cf/SiC Comp
【机 构】
：
National Key Laboratory of Science and Technology on Materials under Shock and Impact, Beijing Insti
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2016年1期
其他文献
Mechanical Property and Microstructure of Alkali-activated Yellow River Sediment-Coal Slime Ash Comp
This work focuses on the production of a new composite material using Yellow River sediment and coal slime ash via alkali-activating method. XRD, FTIR and SEM/EDS were used to characterize the alkali-activated products and microstructure of the composite
Effect of Preheating Temperature on Structural and Optical Properties of Sol-gel Derived Zn0.8Cd0.2O
A great amount of red mud generated from alumina production by Bayer process was considered as a low-grade iron ore with a grade of 5wt% to 30wt% iron. We adopted the reduction roasting-magnetic separation process to recover ferric oxide from red mud. The
Microstructure and Mechanical Properties of Nb-B bearing Low Carbon Steel Plate: Ultrafast Cooling v
The microstructure and mechanical properties of low carbon bainite high strength steel plate were studied via different cooling paths at the pilot scale.There was a significant increase in mechanical properties,and notably,the yield strength,tensile stren
Comparative Study on Oxidation Behavior of Fe-5wt％ Cr Alloy in Various Mixed Atmospheres at 900-1000
The high-temperature oxidation behavior of Fe-5wt％ Cr alloys was investigated in both N2+5vol％ H2O and N2+21vol％ O2+5vol％ H2O atmospheres at 900-1000 ℃ for 120 min by the thermo-gravimetric analysis (TGA). The oxidation kinetics, phase composition and cro
The objective of this study was to investigate the effect of a new combined micro/nano-scale implant surface feature on osteoblasts\' behaviors including cell morphology,adhesion,proliferation,differentiation,and mineralization in vitro.A new micro/nano
Thermodynamic and Kinetic Studies of Effective Adsorption of 2,4,6-trichlorophenol onto Calcine Mg/A
The inlfuence of pre-deformation and heat treatment on mechanical properties of as-extruded ZK60 alloy was investigated. The experimental results indicated that the solid solution, pre-cold rolling and artificial aging treatments remarkably improved the m
To understand the effects of spray parameters on the splashing, cast iron particles were plasma-sprayed onto polished surfaces of aluminum substrate to form single splats. Various plasma arc powers and spray distances were applied to adjust the morphology