【摘 要】
：
Inductively coupled plasma (ICP) technology is a new advanced version of dry-etching technology compared with the widely used method of reactive ion etching (RIE). Plasma processing of the ICP technology is complicated due to the mixed reactions among dis
【机 构】
：
InformationOpticsLaboratory,ShanghaiInstituteofOpticsandFineMechanics,ChineseAcademyofSciences,Shang
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Inductively coupled plasma (ICP) technology is a new advanced version of dry-etching technology compared with the widely used method of reactive ion etching (RIE). Plasma processing of the ICP technology is complicated due to the mixed reactions among discharge physics, chemistry and surface chemistry. Extensive experiments have been done and microoptical elements have been fabricated successfully, which proved that the ICP technology is very effective in dry etching of microoptical elements. In this paper, we present the detailed fabrication of microoptical fused silica phase gratings with ICP technology. Optimized condition has been found to control the etching process of ICP technology and to improve the etching quality of microoptical elements greatly. With the optimized condition, we have fabricated lots of good gratings with different periods, depths, and duty cycles. The fabricated gratings are very useful in fields such as spectrometer, high-efficient filter in wavelength-division-multiplexing system, etc..
其他文献
对获得多波长同时产生的可调控的频率转换器件进行了研究。通过分析非线性晶体中耦合光强随传播距离的变化，提出了一种基于晶体中光强分布获得非线性结构的方法。针对和频过程，利用MATLAB软件进行仿真，设计出了6个和频过程同时发生的非周期结构。为灵活调控各个非线性过程的输出强度，得到任意形状的目标功率谱，提出在设计过程中引入权重系数。对和频及倍频产生的研究表明：获得的非线性结构不仅实现了多波长的同时输出，而且可以任意调节输出光功率谱。该设计方法速度快、效率高，可以为实际制作非线性光学器件提供理论指导。
In this paper, we describe a new type of digital-to-analog converter (DAC) for optical wireless communication. Conversion occurs in the optical rather than the electrical domain. The overall intensity of the light transmitted by an array of light-emitting
雾是影响自由空间光通信性能的不可避免的天气因素, 选择合适的激光波长可以有效的降低其影响。文中针对薄雾、雾、霾三种大气能见度, 在不同传播距离条件下, 计算分析了均处于大气吸收窗口的中红外波长3.8 ?滋m和近红外波长1.55 ?滋m的传输特性。利用Monte Carlo方法对大量光子沿水平方向的传播特性进行数值模拟, 俄罗斯轮盘赌法判定光子是否“湮灭”。计算不同接收面半径和相对光强的关系, 不同大气能见度和不同传输距离下光子的透过率。结果表明3.8 ?滋m波长相对于1.55 ?滋m波长, 在同样的接收面
The basic energy balance model is applied to analyze the hohlraum energetics data from the Shenguang (SG) series laser facilities and the National Ignition Facility (NIF) experiments published in the past few years. The analysis shows that the overall hoh
从实验上研究了GaAs-AlxGa1-xAsDH条形激光器的稳态束腰、束宽和激光功率随电流变化的规律与瞬态自脉动的关系。随着稳态注入电流的变化,激光器的垂直束腰位置都在镜面上,其束宽不变;不管水平束腰位置是否有变化,水平束腰宽有明显变化时,其瞬态往往出现自脉动,而出现自脉动的电流范围往往在光功率特性的A、B扭折之间。
介绍了一种轻小型推扫视频一体化微纳遥感相机的综合优化设计思路。系统设计时综合考虑星地一体化处理, 采用大F数RC系统降低产品光机体积重量; 电子学采用商用货架产品加固技术实现高性能同时降低成本, 星上数据处理采用数字TDI技术实现面阵相机推扫视频一体化成像, 大幅提升成像效能。采用该方法设计的微纳遥感相机具备视频、推扫、条带等多种工作模式, 满足不同应用场景需求。该技术在欧比特视频相机等微纳遥感载荷的设计及研制中进行了应用, 在轨获取了高品质的视频及遥感图像, 在商业遥感载荷市场具有广阔的应用前景。
A 37-element solar adaptive optics (AO) system was built and installed at the 26-cm solar fine structure telescope of Yunnan Astronomical Observatory. The AO system is composed of a fine tracking loop with a tip/tilt mirror and a correlation tracker, a hi
掺镱块状材料是产生高功率超短脉冲激光输出的一种有效技术途径,具有造价低、易加工、易调节、可承受脉冲能量大等优势。该材料介于光纤、单晶光纤、板条、薄片之间,基于块状材料的超短脉冲激光放大器逐渐成为超快激光领域的研究热点。在具体体现形式上,主要有行波(单通、双通、四通)放大结构和再生放大结构;在所使用的增益介质方面,主要以Yb∶YAG为主,另外还有Yb∶KYW、Yb∶KGW、Yb∶CALGO、Yb∶CaF2、Yb∶Lu2O3、Yb∶Y2O3等。梳理和总结了目前已经公开报道的相关结果,并对掺镱块材料超短脉冲激光
The amplification effect on stimulated Brillouin scattering (SBS) and Rayleigh scattering in the backward pumped G652 fiber Raman amplifier (FRA) is studied. The pump source is a 1427.2-nm fiber Raman laser whose power is tunable between 0-1200 mW, and th