Effect of Alloying Additions on the Oxidation of High Speed Steels under Dry and Wet Conditions

来源 :中国腐蚀与防护学报 | 被引量 : 0次 | 上传用户:fyishen
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
An investigation has been carried out into the effects of chromium and vanadium content on the oxidation rate and on the adhesion of oxide scales grown on three different chemical compositions of high speed steels under dry and wet conditions.The oxidation tests were carried out in a thermobalance at 650℃for up to 14.4 ks.The mass gain of the specimens increased with increasing contents of water vapour. Alloy composition had no effect on the oxidation rate in dry conditions.The“adhesion”of the oxide scale was determined using indentation with a Rockwell C diamond and the pull adhesion test to determine the interfacial toughness and the tensile strength of the oxide metal bond,respectively.Generally,the results of the investigation indicated that oxide adhesion was lowest for the specimens exposed to dry conditions, and that with increasing water vapour content,the scale was more adherent.Indentation test results showed that an increase in the V concentration was deleterious to oxide adhesion in both the dry and wet environments,whereas an increase in the Cr-content had little effect on adhesion. An investigation has been carried out into the effects of chromium and vanadium content on the oxidation rate and on the adhesion of oxide scales grown on three different chemical compositions of high speed steels under dry and wet conditions. The oxidation tests were carried out in a thermobalance at 650 ° C up to 14.4 ks.The mass gain of the specimens increased with increasing contents of water vapor. Alloy composition had no effect on the oxidation rate in dry conditions. “adhesion ” of the oxide scale was determined using indentation with a Rockwell C diamond and the pull adhesion test to determine the interfacial toughness and the tensile strength of the oxide metal bond, respectively. General, the results of the investigation that that oxide adhesion was lowest for the specimens exposed to dry conditions, and that with increasing water vapor content, the scale was more adherent.Indentation test results showed that an increase in the V concentration was deleterious to oxid e adhesion in both the dry and wet environments, an an increase in the Cr-content had little effect on adhesion.
其他文献
目的:对甲状腺结节患者的临床病理诊断特点进行研究。方法对我院收治的589例甲状腺结节患者的临床资料进行回顾性的分析。结果良性甲状腺结节的比例高于恶性甲状腺结节,差异具
目的:对隐裂牙全冠修复的两年疗效进行分析评价,以指导临床隐裂牙的保存治疗。方法:66例病例72颗未治疗的隐裂牙分为两组患牙进行金属烤瓷全冠修复治疗,随访两年,观察并分析临床疗
目的:观察会阴侧切皮内可吸收生物缝合线连续缝合加切口顶端环形缝合的临床疗效。方法:两组均采用会阴左斜侧切、阴部神经阻滞麻和2/0#可吸收线。外阴切口顶端皮内环形缝合加连
为揭示核桃青皮中低极性组分的抗病毒机制,本研究以核桃青皮中低极性组分为处理药剂对烟草花叶病毒(TMV)进行预防和治疗处理,测定了K326叶片中与抗病毒性相关的部分生理生化
采用水系流延成型,共烧制备了平板式中温固体氧化物燃料电池(Solid oxide fuel cell SOFC)的NiO/YSZ阳极支撑电解质氧化钇稳定氧化锆(YSZ)薄膜复合体.通过调节优化浆料的pH值
由于本院位于中原地区,中部主要的粮食生产基地.农民为了保证农作物不受病虫害,经常喷洒农药.在使用过程中,农药中毒事件时有发生,所以本地区洗胃机的使用率较高.由于本地区
目的 优选倍青口腔溃疡液的最佳提取工艺.方法 以提取液中没食子酸的含量以及总固体得率为指标,采用L9(34)正交试验方法优选倍青口腔溃疡液的渗漉提取工艺;以靛玉红的含量为指
主要研究了碱性环境对塑木复合材料耐磨性能的影响。结果表明:塑木复合材料的质量增加率随着碱性环境的pH值的增大而增大,随着浸泡时间的延长而增加;碱性环境pH值以及浸泡时
Objective: To study the effects of transferred wild type p73α gene on the sensitivity to the chemotherapeutic agents and the growth of p53-null H1299 cells of
我国汽车产业在社会环境稳定,资源丰富,劳动力充足,市场空间大的条件下发展迅速。但是行业分散,企业规模偏小,生产成本偏高;自主研发能力弱,引进多,模仿多;环保与节能问题突