The nanocrystalline and amorphous Mg2Ni-type Mg2-xLaxNi (x=0, 0.2) hydrogen storage alloys were synthesized by melt-spinning technique. The as-spun alloy ribbons were obtained. The microstructures of the as-spun ribbons were characterized by X-ray diffraction (XRD), high resolution transmission electronic microscopy (HRTEM) and electron diffraction (ED). The hydrogen absorption and desorption kinetics of the alloys were measured using an automatically controlled Sieverts apparatus, and their electrochemical kinetics were tested by an automatic galvanostatic system. The electrochemical impedance spectrums (EIS) were plotted by an electrochemical workstation (PARSTAT 2273). The hydrogen diffusion coefficients in the alloys were calculated by virtue of potential-step method. The obtained results showed that no amorphous phase was detected in the as-spun La-free alloy, but the as-spun alloys substituted by La held a major amorphous phase, confirming that the substitution of La for Mg markedly intensified the glass forming ability of the Mg2Ni-type alloy. The substitution of La for Mg notably improved the electrochemical hydrogen storage kinetics of the Mg2Ni-type alloy. Furthermore, the hydrogen storage kinetics of the experimental alloys was evidently ameliorated with the spinning rate growing.