论文部分内容阅读
[!--newstext--]
[!--title--]
【摘 要】
：
本文系统梳理了现阶段消防用化学防护服的分类标准,重点就危化品事故现场消防化学防护服选择应考虑的主要因素、选择程序和注意事项进行了归纳总结,对今后消防救援队伍处置危化品事故时正确选用化学防护服具有一定的指导意义.
【机 构】
：
宁波市危险化学品应急救援研究中心 浙江宁波315000
【出 处】
：
中国个体防护装备
【发表日期】
：
2021年4期
其他文献
According to current solar power research, both the generating unit\\\'s minimum start-up speed and power generation system\\\'s minimum flow rate for operation decrease with the increase in the impeller solidity. Ideally, a high solidity should be achiev
Three-dimensional (3D) shape registration is a challenging problem, especially for shapes under non-rigid transformations. In this paper, a 3D non-rigid shape registration method is proposed, called balanced functional maps (BFM). The BFM algorithm genera
Effects of Material and Dimension on TCF, Frequency, and Q of Radial Contour Mode AlN-on-Si MEMS Res
This paper investigates the effects of material and dimension parameters on the frequency splitting, frequency drift, and quality factor (Q) of aluminium nitride (AlN)-on-n-doped/pure silicon (Si) microelectromechanical systems (MEMS) disk resonators thro
An increase in the cache capacity is usually accompanied by a decrease in access speed. To balance the capacity and performance of caches, this paper proposes an instruction cache (ICache) architecture based on divide-by-2 memory banks (D2MB-ICache). The
Commonly, the classical formulas are suitable for designing the TE21-mode coupler for the operating frequency under Ka-band by ignoring the wall thickness. However, in practice, for the one operated in the Ka-band, such classical formulas are not valid an
Device-Free Through-the-Wall Activity Recognition Using Bi-Directional Long Short-Term Memory and Wi
Activity recognition plays a key role in health management and security. Traditional approaches are based on vision or wearables, which only work under the line of sight (LOS) or require the targets to carry dedicated devices. As human bodies and their mo
The eddy current pulsed thermography (ECPT) technique is a research focus in the non-destructive testing (NDT) area for defect inspection. Defect feature extraction for defect information analysis in ECPT is limited by image contrast, heat diffusion, back
本文探讨了低温对人体的伤害及防护的必要性,总结了耐低温防护服的测试标准、影响因素.分析了纤维材料、絮片厚度以及面料结构参数与空气层厚度对保暖性的影响,提出了耐低温防护服主要以人体内部辐射热自循环保护为主,在材料上选择具有较低热传导率的纤维与功能性纤维混纺,面料设计上要注重低温对材料性能的损伤,在耐低温防护服的发展趋势中认为防护服应向轻薄化、透湿优良以及积极式保暖方向发展.
机织物的透气性作为服装舒适性最重要的指标之一,受到业界广泛关注,本文分析了机织物透气性与织造工艺参数的关系.为了探讨后梁工艺对织物透气率的影响,采用相同规格的机织物在不同后梁高度下进行织造,并测试坯布透气率;分析了透气率与机织物表面结构、后梁高度的关系,得到了坯布透气率与后梁高度之间的回归方程.结果 表明:机织物坯布的透气性与机织物织造时的后梁高度呈正相关,采用合适的后整理工艺,调节后梁高度带来的透气率改善效果可以体现在成品面料上.
Real-Time Control System Adopted to Energy Storage for Smart Grid Low Wind Applications: A Part of D
In this paper, extensive efforts have been undertaken to design and develop a control system, which is incorporated with an energy storage device that can store energy from low-voltage renewable sources. The developed device acts as a storage element, whi