【摘 要】
：
With the development of industrial technology,heat transfer at the microscale has attracted more and more attention.In this work,200 μm platinum wire and 150 μm nickel-chromium wire were used as experimental objects,which the power was provided by DC powe
【机 构】
：
School of Energy and Environment,Anhui University of Technology,Ma’anshan 243002,China;College of Ec
论文部分内容阅读
With the development of industrial technology,heat transfer at the microscale has attracted more and more attention.In this work,200 μm platinum wire and 150 μm nickel-chromium wire were used as experimental objects,which the power was provided by DC power with the range of 15.6 W to 56.2 W.Distilled water was used as the experimental liquid.Various bubbles on the micro wire were observed and the heat mechanism was analyzed.A variety of bubble attachment phenomena were captured on the 200 μm platinum wire,including the adhesion during bubble detachment,the rotation of small attached bubbles on the surface of large bubble,multiple bubbles circling at the top of the same bubble,and different attached bubble departure phenomena.Marangoui force in the vertical direction triggered the formation of bubble attachment.In addition,the effects of surface tension,adhesion force and buoyancy force on the circling of the bubble were also considered.The analysis of the bubble sweeping on the 150 μm nickel-chromium wire was analyzed.The results showed that the static bubble would interact with the sweeping bubbles on the other side,thereby changing the heat transfer mechanism,which was not discussed in detail before.The bubble jet flow generated by thermocapillary convection on the vertical direction of the bubble surface was the main influencing factor,which would change the microlayer encountered in front of the bubble.The effects of bubble diameter and liquid subcooling on the sweeping velocity were also studied.The results showed that the larger the bubble diameter was,the lower the sweeping velocity would be achieved while the liquid subcooling temperature had less impact on the velocity of sweeping bubble.
其他文献
At present,the structural design of a loop heat pipe (LHP) condenser mostly relies on experience.To analyze the condensation flow pattern in an LHP and to find a more accurate empirical correlation that can better guide condenser design in existing empiri
In the CO2 transcritical power cycle,conventional cooling water can hardly condense subcritical CO2 because its critical temperature is as low as 30.98℃.In order to avoid this condensing problem,CO2-based mixtures have been proposed as working fluids for
The turbulence kinetic energy and heat transfer performance of air in spirally fluted tube were numerically studied at a constant wall temperature with Reynolds number (Re) between 5000 and 45000.Furthermore,the flow dynamics and heat transfer performance
To understand the thermal conductivity improvement of the paraffin and graphite composite PCMs in micro-scale,the conformation characteristics of molecules with rising temperature was studied by molecular dynamics (MD) simulation.And then the structure an
The quality of debris flow susceptibility mapping varies with sampling strategies.This paper aims at comparing three sampling strategies and determining the optimal one to sample the debris flow watersheds.The three sampling strategies studied were the ce
In order to develop a burner with uniform temperature field,the combustion characteristics and thermal performance of partially premixed methane/air jet flames were experimentally studied by using micro jet array burners.The circular tubes of 1.0-mm inner
Existing aerodynamic design systems for multi-stage axial-flow compressor suffer from several limitations,such as experience dependent models and time costly simulations.Few attempts,however,have been devoted to the rapid and automatic optimization of aer
Facing the global wanning trend,humanity has been paying more and more attention to the Carbon Capture,Utilization and Storage.Large amounts of CO2 is emitted with burning fossil fuel as well as by some special industrial processes like the decomposition
Strong wind events frequently result in creating large areas of windthrow,which causes abrupt environmental changes.Bare soil surfaces within pits and root plates potentially expose soil to erosion.Absence of forest may alter the dynamics of water circula
Species diversity exhibit a close relationship with ecosystem services,and making clear the relationship can help us understand the service value and functional mechanism of ecosystems and take measures to promote human well-being.Here,we used species sur