Photocatalytic properties of CaTi2O5 via a facile additive-free aqueous strategy with different pH v

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:delphizhao
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
CaTi2O5 was selectively prepared by a solvothermal process without template and surfactant.The phase of the as-prepared samples was determined by X-ray diffraction(XRD).The microstructure was characterized by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).Results found that pH values had a crucial effect on the crystal phase and shape evolu-tion of the samples.CaTi2O5 sample prepared at pH of 5.2 shows high efficient light harvesting,large surface area and crystallinity.Moreover,CaTi2O5 shuttle-like sample shows good photocatalytic activity against methyl orange due to its longer and thinner shuttle-like morphology and high crystallinity,enhanced light harvesting and large surface area.The photocatalytic rate of CaTi2O5 shuttle-like structure reaches 0.1988 min-1 for 25-min methyl orange degradation under the ultraviolet light irradiation and dis-plays an excellent photostability with a degradation effi-ciency of 0.1952 min-1 after four cycles.
其他文献
由于FBG传感器的存在改变了基体的应变分布,光纤与基体不是直接接触,导致测量应变产生一定的损失,FBG传感器测量应变与基体真实应变不相等。为了提高测量精度,建立了FBG传感器应变传递理论模型,并利用有限元证明其正确性;讨论了结构参数对应变测量的影响。结果表明:FEM解与理论解误差在5%以内,平均应变传递率随着基体弹性模量的增大而逐渐增大,随着粘结层厚度的增大而逐渐减小。
光电导天线(PCA)作为常用的太赫兹发射器件,如何提高其辐射效率,成为国内外研究人员研究的重点.通过时域有限差分法对PCA辐射效率进行研究,在光敏层表面加入柱状结构,使更多
A series of hexagonal phase NaBiF4∶ xYb3+,yEr3+ were successfully synthesized by solvothermal method.The morphology,phase structure,up-conversion luminescence
功率谱密度(PSD)预测是频谱管理中的重要环节.由于功率谱密度具有高度的复杂性、非线性和不确定性,单一的预测模型很难确保预测的准确性和效率.为克服单一预测方法的不足,提
针对柔性作业车间调度问题的组合优化难题,提出了一种基于全局最小负荷初始化的改进遗传算法,并构建最小化最大完工时间的数学目标模型.所提算法使用基于全局最小负荷选择的
Perovskite solar cells have drawn extensive attention in the photovoltaic(PV)field due to their rapidly increasing efficiency.Recently,additives have become necessary for the fabrication of highly efficient perovskite solar cells(PSCs).Additionally,alkali
The hot-deformed magnets processed from nanocrystalline/amorphous Nd-Fe-B powders were preparedunderdifferenthot-pressingtemperatures(600-750℃,at intervals of 25℃)by the self-made hotpressing equipment.The microstructure and magnetic properties of hot-def
In this paper,a plasmonic photo-assisted electrochemical sensor,Au anchored on two-dimensional(2 D)graphitic carbon nitride(g-C3N4)/reduced graphene oxide(rGO)nanosheets(Au/g-C3N4/rGO),was facile fabricated.The morphology and structure of the composite ar
The anisotropic magnetoresistance film is an important core material for developing the magnetic sen-sors.Here,Ta(5)/MgO(3)/NiFe(10)/MgO(3)/Ta(3) multi-layers (
Isothermal oxidation resistance,oxide scale evo-lution and failure mechanism of Ce-doped Co-Al-W-Mo-Ta-B alloy (0.01 at%,0.05 at%,0.10 at% and 0.20 at% Ce)exposed a