Deposition and Characterization of (Ba, Sr)RuO3 Oxide Electrode Using TMHD-Based Single Cocktail Sou

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:zhengwei129
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
(Ba, Sr)RuO3 has been paid an attention as a promising electrode for (Ba, Sr)TiO3 dielectric material due to its similarity in structure and chemical composition with BST. In this study, (Ba, Sr)RuO3 conductive oxide film was deposited on a 4 inch p-type Si wafer by metal organic chemical vapor deposition (MOCVD) using single cocktail source for the practical device application. Ba(TMHD)2, Sr(TMHD)2, Ru(TMHD)3 precursors and solvent [1-EtylePiPerdine (C7H15 N) ] as starting materials were mixed together for single cocktail source. A liquid delivery system (LDS) and a vaporization cell were utilized for the delivery and vaporization of single cocktail source, respectively. The source feeding rate was controlled by a liquid mass flow controller (LMFC). Deposition parameters, such as the oxygen flow and the source flow rate,were sensitive to phase formation, resistivity and the composition ratio of (Ba, Sr)RuO3 films. Highly (110)-textured (Ba,Sr)RuO3 film was obtained vhen the Ar/O2 ratio was 200/140 sccm at a source flow rate of 0.05 sccm. The process window of stoichiometric composition of BSR film was observed with varying the source flow rate from 0.05 sccm to 0.1 sccm.
其他文献
The synchrotron X-ray double-crystal topography was employed to investigate the structure of Si/SiGe/Si deposited on SIMOX SOI. Rocking curves with three diffra
In liquid-liquid solvent extraction processes, diluents have a strong influence on the extraction mechanism and efficiency. In this study, benzene, cyclohexane,
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
Magnesium alloys are widely used as shells of 3C (computer, mobile phone and consumer electronics) equipments for its impressive mechanical and physical propert
The special ultrasonic testing system has been developed for thickness measurement of plasma sprayed coatings. The ultrasonic immersion method was used to obtai
Carbon foam-a kind of new engineering material as packing material was adopted in three biofilters with different pore dimensions and adapted autotrophic nitrit
The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic fiel
SiGe-on-Insulator (SGOI) is an ideal substrate material for realizing strained-silicon structures that are very competing and popular in present silicon technol
Eu2Mn2/3Ta4/3O7 specimen was synthesized from Eu2O3, MnO and Ta2O5 in a reducing atmosphere. Structure analysis was carried out by Rietveld method from X-ray di
Ce0.6Zr0.4O2 solid solution was prepared by co-precipitation technique using hydrazine hydrate as precipitator.Various physico-chemical techniques such as XRD,