【摘 要】
：
Polarization mode dispersion (PMD) in fibers for high-power lasers can induce significant frequency modulation to amplitude modulation (FM-to-AM) conversion. However, existing techniques are not sufficiently flexible to achieve efficient compensation for
【机 构】
：
NationalLaboratoryonHighPowerLaserandPhysics,Shanghai201800,ChinaKeyLaboratoryofHighPowerLaserandPhy
【出 处】
：
HighPowerLaserScienceandEngineering
论文部分内容阅读
Polarization mode dispersion (PMD) in fibers for high-power lasers can induce significant frequency modulation to amplitude modulation (FM-to-AM) conversion. However, existing techniques are not sufficiently flexible to achieve efficient compensation for such FM-to-AM conversion. By analyzing the nonuniform transmission spectrum caused by PMD, we found that the large-scale envelope of the transmission spectrum has more serious impacts on the amount of AM. In order to suppress the PMD-induced FM-to-AM conversion, we propose a novel tunable spectral filter with multiple degrees of freedom based on a half-wave plate, a nematic liquid crystal, and an axis-rotated polarization-maintaining fiber. Peak wavelength, free spectral range (FSR), and modulation depth of the filter are decoupled and can be controlled independently, which is verified through both simulations and experiments. The filter is utilized to compensate for the PMD-induced FM-to-AM conversion in the front end of a high-power laser facility. The results indicate that, for a pulse with phase-modulation frequency of 22.82 GHz, the FM-to-AM conversion could be reduced from 18% to 3.2% within a short time and maintained below 6.5% for 3 h. The proposed filter is also promising for other applications that require flexible spectral control such as high-speed channel selection in optical communication networks.
其他文献
基于宽带啁啾脉冲的小尺度自聚焦形成过程，利用包含时空项的非线性薛定谔方程进行数值计算，比较分析了不同空间位置(特别是空间调制峰位置及调制谷位置)的时间演变过程，发现不同空间位置的时间演化过程完全不一样。在小尺度自聚焦过程中，调制峰处的脉宽随传输距离的增加而减小，当调制峰值处的强度达到最大时，其脉宽达到最小值;而在调制谷位置处的脉宽则一直处于展宽状态。分析了脉冲啁啾对不同空间位置时间演变的影响规律，负啁啾加速了调制峰位置处的脉冲压缩，却抑制了调制谷位置的脉冲展宽；而正啁啾则起相反的作用。
Owing to the small differences between the cross-sections of the four emission peaks around 1.3 μm, an efficient four-wavelength synchronous launched laser is demonstrated using a Nd:GdLuAG crystal. The laser has no special resonator design. The maximum o
通过同步送粉方式在Q235钢基材表面制备了添加不同质量分数纳米TiO2和CeO2的Ni基激光熔覆层,分析了熔覆层的表面形貌、显微组织和物相组成,并测定了熔覆层的硬度和耐腐蚀性。结果表明,在Ni基合金粉末中同时加入TiO2和CeO2,可以充分发挥二者的性能,得到组织均匀细密、无裂纹、耐腐蚀性较高的熔覆层,也可改善Ni基激光熔覆层的组织结构并提高其性能。
研制了环形孔径锥镜剪切相机,并利用它进行激光散斑照相,测量物体的位移导数场。该相机一次实验即可在一张散斑图上同时记录物体所有各方向的位移导数场,且在全场滤波时连续再现各方向的位移导数场。
应用两种气体光激射器新技术，可使高功率和多模光激射器的全部能量集中于一个频率输出。由西耳凡尼亚电气产品公司的工程师和该公司的斯坦福大学的顾问所研究戍功的技术有效地解决了现有光激射器的应用问题，并非真正相干的问题。尤其是在通讯、光谱学和雷达的应用上。
采用Bphen/Ag/Bphen作为阴极缓冲层，制备了基于CuPc/C60的有机太阳电池，研究了在有机薄膜中加入金属超薄层对器件性能的影响。结果表明，在Bphen缓冲层中加入1nm的Ag时，器件的电子注入和传输都得到了提高。采用常用的等效电路模型，计算了缓冲层对器件性能参数的影响。发现Bphen/Ag/Bphen可以改善有机层和电极的界面接触性能，降低器件的串联电阻。此外，测试了器件的吸收光谱，研究了复合缓冲层对器件光子吸收的作用，发现加入Ag薄层后提高了器件的光吸收能力。
采用四象限探测器和功率谱密度法，搭建了一套快速标定光镊三维光阱刚度的测量系统.实验中，用四象限探测器记录微粒做受限布朗运动时的位置信息，用功率谱密度法标定光阱刚度，测得了直径0.97 μm SiO2小球和直径1 μm PMMA小球的光阱刚度与激光功率的关系.结果表明：对于SiO2小球，当激光功率为50~120 mW时，光阱刚度与激光功率成正比；对于PMMA小球，当激光功率为80~130 mW时，光阱刚度与激光功率成正比.该光镊系统可用于生物、物理等微观领域研究的高准确度测力系统.
We demonstrate a laser diode end-pumped helium gas-cooled multislab Nd:glass laser amplifier. The design and thermal management of the proposed laser amplifier are discussed. The thermally induced wavefront aberration of the slabs was also measured and co
对纳秒级宽带KrF激光脉冲的时间整形进行了研究。采用受激布里渊散射(SBS)脉冲压缩KrF激光获得短脉冲,通过脉冲堆积获得KrF激光时间整形脉冲。利用激光放大器对整形脉冲进行放大,对KrF激光整形脉冲的形状影响较大。通过对放大前整形脉冲形状的调整,在放大后可以得到所需形状的整形脉冲,一次放大能量输出可达50 mJ,二次放大能量输出可达300 mJ。理论分析与实验结果一致。研究表明,短脉冲堆积和放大器放大的组合方案具有较强的整形能力。