【摘 要】
：
The physical properties, the pre-reacting performance and melting properties of the loose glass batch and the granulated glass batch were investigated, respectively. The experimental results showed that compacted glass batch could reduce dust, use ultra-f
【机 构】
：
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology,Wuhan 4
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The physical properties, the pre-reacting performance and melting properties of the loose glass batch and the granulated glass batch were investigated, respectively. The experimental results showed that compacted glass batch could reduce dust, use ultra-fine powder, and improve heat transfer efficiency. When loose glass batch was compressed into granular, the thermal conductivity was increased from 0.273 W/m?℃to 0.430 W/m?℃, the activation energy Ea of pre-reacting decreased from 178.77 kJ/mol to 143.30 kJ/mol. Using the pre-reacted granular glass batch can significantly reduce the melting time, increase the batch melting rate, and decrease the heat consumption of 1kg molten glass from 3591.24 to 3277.03kJ/kg.
其他文献
The relationship between Pb leaching concentration and the solution’s pH with time was analyzed when cement in its solidiifed form was leached in an acid medium. The effects of the particle size of the solidified form, the cement adding method, and the hy
The total utilization amount of red mud is limited due to its high content of alkali, heavy metals and naturally occurring radioactive element. In order to rationalize the use of red mud, a typical ifeld road cement using dealkalized red mud (content of a
P-nitrophenol (PNP) adsorption in batch and fixed bed adsorbers was studied. The homogeneous surface diffusion model (HSDM) based on external mass transfer and intraparticle surface diffusion was used to describe the adsorption kinetics for PNP in stirred
In order to facilitate the development and application of air entraining agents (AEA) in the high performance concrete, entrained air void structure parameters (air void size range from 10 to 1 600 μm) of 28 d sifted mortar were measured by image analysis
The tensile strength of a corroded rebar in a 53-year-old concrete structure was studied. The microstructure of the metallic substrate, the fracture surface, and the corrosion product layers were investigated. Metallographic observation results showed tha