Single-atom catalysts for metal-sulfur batteries:Current progress and future perspectives

来源 :能源化学 | 被引量 : 0次 | 上传用户:maqianjin123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Metal-sulfur batteries are recognized as a promising candidate for next generation electrochemical energy storage systems owing to their high theoretical energy density,low cost and environmental friendliness.However,sluggish redox kinetics of sulfur species and the shuttle effect lead to large polar-ization and severe capacity decay.Numerous approaches from physical barrier,chemical adsorption strategies to electrocatalysts have been tried to solve these issues and pushed the rate and cycle perfor-mance of sulfur electrodes to higher levels.Most recently,single-atom catalysts(SACs)with high cat-alytic efficiency have been introduced into metal-sulfur systems to achieve fast redox kinetics of sulfur conversion.In this review,we systematically summarize the current progress on SACs for sulfur elec-trodes from aspects of synthesis,characterization and electrochemical performance.Challenges and Dotential solutions for designing SACs for high-performance sulfur electrodes are discussed.
其他文献
Graphite as a promising anode candidate of K-ion batteries (KIBs) has been increasingly studied currently,but corresponding rate performance and cycling stabili
It is of vital importance to accelerate the sluggish oxygen reduction reaction (ORR) process at the cathode with earth-abundant metal-based catalysts for the co
A new catalyst of Co/La4Ga2O9 for CO2 hydrogenation to produce ethanol was prepared by reducing LaCo0.5Ga0.5O3,which showed excellent selectivity to ethanol (≈
Developing an efficient artificial photosynthetic system for transforming carbon dioxide and storing solar energy in the form of chemical bonds is one of the gr
Photovoltaic technology is a promising choice for human beings to solve critical environmental and energy problems. Much effort has been expended around the world on this technology which has allowed it to flourish, both in power conversion efficiency (PC
Designing low-cost,easy-fabricated,highly stable and active electrocatalysts for oxygen evolution reaction (OER) is crucial for electrochemical (EC) and solar-d
Surface-functionalized nitrogen/carbon co-doped polymorphic TiO2 phase junction nanoparticles uniformly distributed in porous carbon matrix were synthesized by
采用共沉淀法打片成型制备出铜锌铝系加氢催化剂,考察了反应条件对该催化剂催化醋酸乙酯加氢制乙醇活性和选择性的影响。结果表明,在反应温度220℃、压力2.5 MPa、氢酯物质的量比30、液空速1.0 h-1时催化剂性能最佳,醋酸乙酯转化率为96.2%,乙醇选择性为99.4%。结合BET、XRD、XPS等手段对反应前后的催化剂样品进行了表征,发现催化剂具有明显的介孔结构,最可几孔径约16 nm,比表面积为50~60 m2/g,Cu0为催化剂主要活
以Fe(NO3)3·9H2O和(NH4)6Mo7O24·4H2O为Fe源和Mo源,通过共沉淀法制备了系列不同焙烧温度的铁钼催化剂,并考察了催化剂对甲醇氧化制甲醛反应性能的影响。结果表明,400℃焙烧的铁钼催化剂具有最佳催化性能,其甲醇转化率为96.6%、甲醛收率为87.6%、甲醛选择性为80.7%。进一步通过BET、XRD、Raman、SEM、XPS及H
采用等体积超声浸渍法制备了一系列锌改性HZSM-5沸石催化剂,并采用ICP、XRD、FT-IR及NH3-TPD等表征手段对改性催化剂的物理化学性质进行了表征。通过构建串联催化剂针对性地探究了锌在甲醇制芳烃反应中的作用,尤其是对烯烃芳构化过程的影响。结果表明,锌的引入不仅提高了反应中脱氢芳构化活性,还抑制了氢转移反应,进而降低了副产物低碳烷烃的量,使BTX的选择性最高达到了50.66%。此外,实验结果也表明催化剂中锌的含量过高会减少催化剂强酸量,降低BTX的选择性。