论文部分内容阅读
Preparation and Optical Properties of Er3+∶Na2O-Al2O3-SiO2 Transparent Glass-Ceramics
【机 构】
：
School of Materials Science and Engineering, Changchun University of Science and Technology, Changch
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2017年1期
其他文献
Powder Quartz/Nano-TiO2 Composite: Mechanochemical Preparation and Photocatalytic Degradation of For
Powder quartz (PQ)/nano-TiO2 composite was prepared by a mechanochemical method. Based on as-prepared PQ/nano-TiO2 composite, we prepared interior paints and investigated the degradation efficiency of formaldehyde (DEF). Scanning electron microscopy showe
Mechanical Properties and ITZ Microstructure of Recycled Aggregate Concrete Using Carbonated Recycle
The effect of carbonation treatment and mixing method on the mechanical properties and interfacial transition zone (ITZ) properties of recycled aggregate concrete (RAC) was investigated. Properties of recycled concrete aggregate (RCA) were tested firstly.
The influence of polyepoxysuccinic acid(PESA)on the solid phase products in hydrated Portland cement pastes was investigated by isothermal calorimetry,X-ray diffraction(XRD),29 Si and 27 Al nuclear magnetic resonance(NMR).The results indicated that PESA b
Dynamic compression tests were carried out to investigate dynamic mechanical behavior and adiabatic shear bands in ultrafine grained (UFG) pure zirconium prepared by equal channel angular pressing (ECAP) and rotary swaying. The cylindrical specimens were
Mechanical Properties of Mo Fiber-reinforced Resin Mineral Composites with Different Mass Ratio of R
Mo fibers were added to RMC with different mass ratios of resin and hardener to improve its mechanical properties. The influences of fiber surface state and hardener content on interface bonding strength and mechanical properties of RMC were studied, resp
NbCrAl coatings in the presence or absence of Al outer layer were prepared on C103 Nb based alloy and alumina substrate by direct current magnetron sputtering technique. The oxidation performance of coating systems was evaluated by isothermal oxidation te
Lignin as the main component of black liquor is generally employed to modify aliphatic superplasticizer (AFS). However, the modification effect is hard to evaluate correctly due to the uncertain molecular structure of lignin and the disturbance from the c
The hardfacing alloys with different concentrations of titanium were deposited on carbon steel substrates by shielded metal arc welding, and the effect of titanium content on the microstructure characteristics of the hardfacing alloys was investigated. Th
Influence of Annealing Treatment on Microstructure Evolution and Mechanical Property of Friction Sti
In order to improve microstructure distribution and mechanical properties of Mg alloy joint by annealing treatment, die-casting AZ31 Mg alloy was successfully welded at rotation speed of 1400 rpm and travel speed of 200 mm/min. The welded joints were anne