【摘 要】
：
The research of complex networks facilitates the progress of various disciplines,including biology,chemistry,social science,computer,and communication engineering.Recently,it is popular to utilize complex networks to study the communication networks,such
【机 构】
：
SchoolofElectronicInformationandCommunications,WuhanNationalLaboratoryforOptoelectronics
【基金项目】
：
supported in part by Young Elite Scientists Sponsorship Program by CAST under Grant number 2018QNRC001,National Science Foundation of China with Grant number 91738202, 62071194
论文部分内容阅读
The research of complex networks facilitates the progress of various disciplines,including biology,chemistry,social science,computer,and communication engineering.Recently,it is popular to utilize complex networks to study the communication networks,such
其他文献
Selective recovery of scandium and titanium from red mud leaching solution was achieved through neutralization precipitation followed by acid leaching approach.In the neutralization precipitation section,the effects of pH,temperature and reaction time on
Internet of Vehicles(IoV)is an evolution of the Internet of Things(IoT)to improve the capabilities of vehicular ad-hoc networks(VANETs)in intelligence transport systems.The network topology in IoV paradigm is highly dynamic.Clustering is one of the promis
提升余热余能发电水平是提高钢铁系统能效和竞争力的有效途径,也是实现钢铁绿色低碳发展的重要举措。余热余能自发电率是钢铁能源转换功能的关键表征指标,通过制定行业标准科学评判余热余能自发电率具有重要意义。研究认为,按目前成熟技术和管理能力,钢铁行业有提升二十个百分点自发电率的潜力,将带来显著的经济效益和节能降碳效益。以提升自发电为突破口,能够加快推进钢铁绿色低碳发展。
In this paper,we investigate a backhaul framework jointly considering topology construction and power adjustment for self-organizing UAV networks.To enhance the backhaul rate with limited information exchange and avoid malicious power competition,we propo
大型航天低温推进剂贮箱由“金属”到“复合材料”的更新换代已成为世界航天工业发展的主要趋势。凭借复合材料在质量和成本方面的巨大优势,大型航天低温复合材料贮箱被认为是未来火星探测、载人登月等大型航天任务的重要保障。然而,复合材料贮箱在低温服役条件下产生的渗漏现象,是其目前面临的技术瓶颈之一,严重制约复合材料贮箱全面服役。从实验研究和理论研究两个方面介绍近20年来国内外主要研究机构及团队在该领域开展的相关研究及取得的成果,在此基础上对复合材料渗漏机理进行归纳总结,进一步给出通过复合材料体系研发、铺层方式
In recent years, autonomous driving technology has made good progress, but the noncooperative intelligence of vehicle for autonomous driving still has many technical bottlenecks when facing urban road
Symmetrical solid oxide fuel cells (SSOFCs) could be alternative energy conversion devices due to their simple fabrication process and low cost. Herein, perovsk
Cerium oxide-based nanozymes have recently drawn much attention in the field of biomedical and antioxidant applications, because of their unique regenerative or
为了改善不锈钢氩氧脱碳炉渣的稳定性,采用风淬法对不锈钢氩氧脱碳炉渣进行粒化试验,研究了炉渣碱度、改质剂、温度、风速和喷吹角度对其粒化效果的影响规律。结果表明,渣粒平均粒径随着碱度的降低先减小后逐渐增大,碱度为1.8时平均粒径达到最小值4.31 mm;添加氧化硼改质后,粒化渣平均粒径随着碱度的降低与改质前变化趋势相同,但整体减小;随着熔渣温度升高,粒化渣粒平均粒径增大;随着风速增大和喷吹角度减小,粒化渣粒平均粒径逐渐减小,在21.5 m/s风速下得到最小粒径3.67 mm,当喷吹角度为25°时达到最小粒径4
NM450钢在使用过程中的折弯开裂是影响其使用效率的主要因素之一。通过对开裂处取样,结合金相组织检验、扫描电镜、能谱分析和硬度检测结果,对开裂原因进行分析研究。研究结果表明,Mn、P等元素的偏析导致其组织结构上存在差异,从而在不同组织结合处产生裂纹源引起开裂;在裂纹处存在TiN和MnS夹杂聚集。MnS夹杂的聚集导致材料受机械应力影响沿夹杂物聚集的方向开裂,而TiN夹杂的聚集造成在折弯过程中应力微裂纹出现,进一步促进折弯开裂的出现。