【摘 要】
：
为了减小失配造成的测试误差,在测量调制信号的微波功率时提出了一种直流校正方法.在传感器左端输入微波功率,右端输入直流功率,微波功率存在的寄生损耗和电磁耦合造成了失配
论文部分内容阅读
为了减小失配造成的测试误差,在测量调制信号的微波功率时提出了一种直流校正方法.在传感器左端输入微波功率,右端输入直流功率,微波功率存在的寄生损耗和电磁耦合造成了失配误差,而直流功率不存在失配误差,所以通过右端输入的直流功率可以校正左端微波功率的失配误差.测试了在不同调制率和调制深度的校正因子.测试结果表明,载波频率是造成幅度调制测试误差的主要因素,校正后载波频率和调制率对输出电压的影响很小,频率响应在20 GHz范围内变得相对平滑.而且灵敏度平均提高了大约0.12 mV/dBm.因此,该直流校正方法对于终端式微波功率传感器具有一定的参考意义.
其他文献
External confinement by fiber reinforced polymer (FRP) is an efficient technique to increase the bearing capacity and ductility of concrete. To better study the
设j,k和m是3个正整数.给定一个图G.设f:V(G)→{0,1,…,m-1}是一个映射.如果对图G的任意一对相邻顶点u和v都有|f(u)-f(v)|m≥j,对任意一对距离为二的顶点都有|f(u)-f(v)|m≥k,
Al2O3 particle-reinforced ZL109 composite was prepared by in situ reaction between CuO and Al. The microstructure was observed by means of OM, SEM and TEM. The
In the grinding process, grinding fluid is delivered for the purposes of chip flushing, cooling, lubrication, and chemical protection of the work surface. Due t
We present a theoretically-exact and stable computed tomography (CT) reconstruction algorithm that is capable of handling interrupted illumination and therefore
The impact of the integral non-linearity (INL) to the time resolution of HPTDC (High Performance Time to Digital Converter) is presented in this paper. An INL c
Based on experiment modal analysis (EMA) and operation modal analysis (OMA), the dynamic characteristics of cylindrical grinding machine were measured and provi
In this paper, defects detection in brazed weldment with lattice structure is studied using ultrasonic Lamb wave. Based on the ultrasonic guided wave theory, th