论文部分内容阅读
我厂承接一辆送修的本田Accord(雅阁)轿车时,据客户反映,该车有行驶无力、加速反映慢等故障。经检查,发动机水、油容量符合要求,怠、中、高速运转平稳。检查离合器时发现踏板弹力弱,离合器分离不彻底,加速时达不到相应的速度,初步诊断为离合器打滑。为进一步证实此一故障,拉住手制动器,用二档起步,发动机不熄火,前诊断正确。拆卸后发现膜片式离合器摩擦片偏黑发亮,离合器压板端面起槽,两者均有烧蚀现象,弹簧片已发兰,应更换离合器总成。
I plant to undertake a repair Honda Accord (Accord) sedan, according to customer feedback, the car has driving weak, accelerate the slow response to failure. After examination, the engine water, oil capacity to meet the requirements, idle, medium and high-speed operation smoothly. Check the clutch pedal force found weak, the clutch is not completely separated, the acceleration can not reach the appropriate speed, the initial diagnosis of clutch slip. To further confirm this failure, pull the handbrake, start with second gear, the engine does not flame out, the former diagnosis is correct. After disassembly, it was found that the diaphragm clutch friction plate is black and bright, the clutch pressure plate end face is grooved, and both have ablation phenomenon. The spring plate has been made blue and the clutch assembly should be replaced.