【摘 要】
：
The developed 1Cr18Ni9Ti austenitic stainless steel containing 1.63 wt.%B have been characterized by X-ray diffraction (XRD), electron probe microanalyzer (EPMA
【机 构】
：
Department of Material Science and Engineering,School of Electromechanical Engineering,School of Mec
论文部分内容阅读
The developed 1Cr18Ni9Ti austenitic stainless steel containing 1.63 wt.%B have been characterized by X-ray diffraction (XRD), electron probe microanalyzer (EPMA), optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and Vickers microhardness measurement. The microstructural evolution and property of high boron stainless steel after solution treatment at the temperature of 1050℃ are also investigated. The results show that the main compositions of borides are Fe, Cr and B, and with small amount of Ni, Mn and C elements. Silicon is insoluble in the borides. The hardness of borides is over 1,500 HV. It has been found that borides do not decompose during solution treatment, but part of borides dissolves into the matrix. The effect of increasing the solubility of boron element in the austenitic matrix favours the hardness enhancement by 8.54%. High boron stainless steel has excellent wear resistance in corrosive environment. Lifetime of transfer pipe made of high boron-containing stainless steel is 1.5-1.8 times longer than that of boron-free 1Cr18Ni9Ti stainless steel.
其他文献
A high capacity data hiding technique was developed for compressed digital audio.As perceptual audio coding has become the accepted technology for storage and t
CO2 continuous wave laser beam had been applied to the laser glazing of plasma sprayed nanostructure zirconia thermal barrier coatings. The effects of luser gla
The rapid development of multimedia techniques has increased the demands on multimedia processors.This paper presents a new design method to quickly design high
Routing is one of the most important supporting parts in wireless sensor networks (WSNs) application that directly affects the application efficiency. Routing t
Three-dimensional bending analysis is presented for a simply supported orthotropic functionally graded rectangular plate in this paper.Assuming that material pr
In angle-only target tracking,the aim is to estimate the relative distance of a target and platform by using measurement of elevation and azimuth.In the case th
To develop the technique for order preference by similarity to an ideal solution,namely,TOPSIS method with multi-goal in fuzzy decision environment.Firstly,a ne
一维光子晶体结构简单,不难制备,成本低廉,有一定的研发应用潜力.为了获得在可见光频段内具有超宽带隙的一维光子晶体,以Al2O3和TiO2为组分材料,将缺陷结构光子晶体与周期结
The new model for parallel repairable system is introduced,and it is based on the practice problems of maintenance and the idea of Ion-Channel modeling.In the n