1.调速器上的200轴承可翻个使用。翻转后,轴承内、外套轴向受力面改变,滚珠对内、外套的运动方向改变。 2.调速器的高速限制螺钉的上部磨损较多,而低速限制螺钉的上部没磨损,二者可互换。 3.调速器拉杆球头销和调节拉杆联接孔磨损后,可将球头销的锁紧垫片换为弹簧垫圈,或把厚的弹簧垫圈换成薄的弹簧垫圈,使球头与调节拉杆联接孔的轴向相互位置和径向相互位置发生变化。 1. Governor on the 200 bearings can be turned over to use. Flip, the bearing, the outer sleeve axial force surface changes, the ball on the inside, the direction of movement of the jacket changes. 2. Governor high speed limit screws wear the upper part of the upper limit of low speed screw is not worn, the two are interchangeable. 3. governor pull rod ball pin and adjustment rod coupling hole wear, the ball can be replaced by the locking pin gasket spring washer, or the thick spring washer replaced by a thin spring washer, the ball head and adjust Tie rod coupling hole axial mutual position and radial mutual position changes.