论文部分内容阅读
The Crack Self-healing Properties of Cement-based Material with EVA Heat-melt Adhesive
【机 构】
：
College of Materials Science and Engineering,Southeast University,Nanjing,21189,China;Jiangsu Key La
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2011年4期
其他文献
Influence of Co+Nb on the Nd_8Fe_(82)Co_3Nb_1B_6 nanocomposite magnets was investigated by adding Co element combined with Nb element.Results show that the high temperature stability of two phases is increased.Adding Co+Nb could improve the glass forming
Proton conducting composite membranes from sulfonated polyether ether ketone and SiO2 for direct methanol fuel cell (DMFC) application were prepared with sulfonated polyether ether ketone(SPEEK) and tetracethoxy silane(TEOS) by sol-gel method. The covalen
The influence of acetic acid on dynamic behavior of hydrolazation and film forming of an expoxy-silane compound(γ-GPS)was investigated by conductivity meter,IR and AFM.The experimental results show that there is an optimal pH value(pH=4-5)for hydrolysis o
The effects of 3 chairside polishing kits and mechanical brushing on the surface roughness of 3 different acrylic denture base resins were compared. Acrylic denture base resins (auto-polymerizing, heat-polymerizing, injected heat-polymerizing resins) were
Fabrication of Isotropic Pyrocarbon at 1400℃ by Thermal Gradient Chemical Vapor Deposition Apparatus
An experiment was designed to prepare isotropic pyrocarbon by thermal gradient chemical vapor deposition apparatus.The deposition was performed under ambient atmosphere at 1400℃,with natural gas volume flow of 3.5 m~3/h for 80 h.The results show that the
Fe-Ni-Al mixtures as hot-pressing sintering additive to Titanium diboride(TiB_2) were studied.It is found that liquid alloy formed under high temperature hardly has effects on the densification behaviors of TiB_2-independent.Fe-Ni-Al additive just works a