【摘 要】
:
A series of novel carbon nanofibers (CNFs) based Cu-ZrO2 catalysts were synthesized by deposition precipitation method.To investigate the influence of promoter,catalysts were loaded with 1,2,3 and 4 wt% ZnO and characterized by ICP-OES,HRTEM,BET,N2O chemi
【机 构】
:
Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University,
论文部分内容阅读
A series of novel carbon nanofibers (CNFs) based Cu-ZrO2 catalysts were synthesized by deposition precipitation method.To investigate the influence of promoter,catalysts were loaded with 1,2,3 and 4 wt% ZnO and characterized by ICP-OES,HRTEM,BET,N2O chemisorption,TPR,XPS and CO2-TPD techniques.The results revealed that physicochemical properties of the catalysts were strongly influenced by incorporation of ZnO to the parent catalyst.Copper surface area (Scu) and dispersion (Dcu) were slightly decreased by incorporation of ZnO promoter.Nevertheless,Scu and Dcu were remarkably decreased when ZnO content was exceeded beyond 3 wt%.The catalytic performance was evaluated by using autoclave slurry reactor at a pressure and temperature of 30bar and 180 ℃,respectively.The promotion of CuZrO2/CNFs catalyst with 3 wt% of ZnO enhanced methanol synthesis rate from 32 to 45g kg-1 h-1.Notably,with the ZnO promotion the selectivity to methanol was enhanced to 92% compared to 78% of the un-promoted Cu-ZrO2/CNFs catalyst at the expense of a lowered CO2 conversion.In addition,the catalytic activity of this novel catalyst system for CO2 hydrogenation to methanol was compared with the recent literature data.
其他文献
Carbon cloth modified by hydrothermal treatment in ammonia water is developed as the positive electrode with high electrochemical performance for vanadium redox flow batteries.The SEM shows that the treatment has no obvious influence on the morphology of
Due to the unique structure of perovskite materials,their capacitance can be improved by introducing oxygen vacancy.In this paper,the LaMnO3-δ material containing oxygen vacancy was synthesized by molten salt method in KNO3-NaNO3-NaNO2 melt.The La-Mn-O cr
The earth-abundant magnesium metal is a kind of promising anode material due to its low reduction potential (-2.356V vs.SHE), high volumetric and gravimetric specific capacities of 3882 mAh cm-3 and 2234 mAh g-1 respectively [1].Moreover, the magnesium an
An approach to the simultaneous reclamation of carbon and sulfur resources from C02 and H2S has been proposed and effectively implemented with the aid of catalysts.A brief thermodynamic study reveals the potential of direct reduction of C02 with H2S (15:1
Porous nanocarbons with average particle size 20-40 nm were developed using biowaste oil palm leaves as a precursor.Simple pyrolysis was carried out at 700 ℃ under nitrogen atmosphere.Obtained porous nanocarbons showed excellent porous nature along with s
LiNi0.915Co0.075Al0.01O2 (NCA) with Zr(OH)4 coating is demonstrated as high performance cathode material for lithium ion batteries (LIBs).The coated materials are synthesized via a simple dry coating method of NCA with Zr(OH)4 powders,and then characteriz