论文部分内容阅读
1.检查切割器,调整刀片间隙,更换疑似隐患机件。2.检查输送槽、倾斜输送器链耙,对松动的及时紧固。3.检查紧固机架、轮系各连接紧固部位、各拉杆备紧螺母或放松销。4.检查调整伸缩扒齿位置,校正变形的搅龙叶片。5.检查三角皮带和链条张紧度,及时调整张紧轮,紧固带轮、链轮。6.检查液压系统油箱油位情况和油路各连接接头以及法兰盘链接与固定。若液压油不足,要及时添加;若有渗漏、松动现象,要及时焊接、紧固、更换。7.检查发动机水箱、燃油箱、柴油机底壳油位,若有不足,要及时添加。
1. Check the cutter, adjust the blade clearance, replacement of suspected hidden parts. 2. Check the trough, tilt the conveyor chain rake, loose on the timely fastening. 3. Check the fastening rack, the gear fastening parts of the connection, the tie rod tight nut or pin. 4. Check and adjust the telescopic gear teeth position, the correct deformation of the auger blade. 5. Check the triangular belt and chain tension, adjust the tension wheel, fastening pulley, sprocket. 6. Check the hydraulic system tank oil level and the oil connection joints and flanges and the fixed link. If the lack of hydraulic oil, to be added in time; if leaks, loose phenomenon, timely welding, fastening, replacement. 7. Check the engine tank, fuel tank, diesel engine oil level, if insufficient, to be added in time.