论文部分内容阅读
电脑开机后,主板上的BIOS(Basic Input/OutputSystem)便立即开始进行POST(Power On Self Test),即“开机自我测试”。在进入POST之后,就根据CMOS中保存的系统设置检查并初始化每一种设置,如:内存、显卡、硬盘、键盘等。如果在POST过程中,BIOS发现某一部分存在故障,则将在屏幕上显示故障提示信息,并伴有报警的声音;如果在显示器初始化之前发现故障,则不能在屏幕上显示故障提示信息,仅有“嘟嘟”的报警声。下面以AMI BIOS为例,就BIOS常见错误及其处理方法做一小结,供大家参考。 AMI BIOS常见错误信息提示及处理方法:
After the computer is powered on, the BIOS (Basic Input / Output System) on the motherboard immediately starts POST (Power On Self Test), that is, “boot self-test.” After entering the POST, check and initialize each setting according to the system settings saved in CMOS, such as: memory, video card, hard disk, keyboard and so on. If during POST, the BIOS detects that a part is faulty, the error message will be displayed on the screen accompanied by an alarm tone. If the error is detected before the display is initialized, the error message can not be displayed on the screen. Only the “Toot” alarm sound. The following to AMI BIOS, for example, to BIOS common errors and their treatment to do a brief summary for your reference. AMI BIOS common error message prompts and solutions: