论文部分内容阅读
Controllable Synthesis of WO3 Nanowires by Electrospinning and Their Photocatalytic Properties Under
【机 构】
：
Department of Physics, Beihang University, Beijing 100191,China
【出 处】
：
金属学报（英文版）
【发表日期】
：
2015年1期
其他文献
Effect of Al4C3 Particle Size Distribution in a Al-2.5C Master Alloy on the Refining Efficiency of t
The Al-2.5C master alloy is prepared to investigate the effect of the Al4C3 particle size distribution on the refining efficiency of the AZ31 alloy.The results indicate that the Al4C3 particles are potent nucleation substrates for primary α-Mg grains.With
The present work focuses on the structural stability upon hydrogenation of three typical La-Mg-Ni-based alloys: La2-MgNi9, La3MgNi14 and La4MgNi19. Structural changes during gaseous and electrochemical cycles were characterized, and the influence of the s
Open-celled porous (TiB2-Al2O3)/NiAl composites were successfully fabricated by using spherical carbamide as space holders via self-propagating high-temperature synthesis (SHS).Effects of 10Al-3B2O3-3TiO2 contents (0-20 wt％) on the pore structures and the
Effects of Deformation Texture and Twins on the Corrosion Resistance of Rolled AZ31 Mg Alloy Under 5
Influence of Surface Finishing on High-Temperature Oxidation of AISI Type 444 Ferritic Stainless Ste
This research is focused on the study of the samples,approximatively 15 × 30 mm2 sized,that were mechanically cut from two sheets (0.4 and 0.2 mm thick,respectively) of AISI 444 Type ferritic stainless steel (FSS) (DIN 1.4521,Eu designation X2CrMoTil8-2);
Effects of Passes on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Durin
The multidirectional forging (MDF) process was conducted at temperature of 753 K to optimize the mechanical properties of as-homogenized Mg-13Gd-4Y-2Zn-0.6Zr alloy containing long-period stacking ordered phase.The effects of MDF passes on microstructure e
As a kind of important structural materials,metals have been playing a significant role in human culture.Anthropologists refer to humans as “the toolmakers”,and this is indeed a very realistic description of a key aspect of human beings responsible for th
期刊